Adding A Surround Sound Mode - AMX DESIGN XPRESS HOME THEATER V1.3 - PROGRAMMER GUIDE Instruction Manual

Using the DXP-HT Project Wizard
The order of the Surround Sound Modes can be modified by using the Up and Down arrows to the
right of the Surround Sound Modes list. Clicking on a defined list item selects that item for editing.

Adding a Surround Sound Mode

1. Type the text that will appear on the Touch Panel button for this preset in the Display Name
text box.
2. Select a command from the Command drop-down list.
38
The Add button will add a new surround mode to the top of the list. Note that you can
only add new modes if IR has been specified as the receiver's Control Method (as
indicated in the System Information dialog).
The Delete button deletes the selected surround mode from the list.
Click the Insert button to insert a new mode after the currently selected mode.
Click the Apply button to apply any changes that have been made to the selected mode.
Click Clear to reset all surround modes and display names to their default settings. This
option also restores any modes that have deleted.
DXP-HT v1.3 - Programmer's Guide