AMX CAFE DUET STANDARD NETLINX API (SNAPI) COMPONENTS AND LISTENERS Instruction Manual page 104

Component Functions: (Cont.)
Name: Channel: Level: Command:
setSpaHeat- 180
State(SOLAR)
setSpaHeat- 181
State(SOLAR_PREFER
RED)
setSpaJets(HIGH) 185
setSpaJets(LOW) 183
setSpaJets(MEDIUM) 184
setSpaJets(OFF) 182
setSpaLightOn(state) 173
setSpaPumpOn(state) 171
setSpaSetpoint(nTem- 40
perature)
Listener
Name: Pool Spa Listener
Interface: IPoolSpaComponentListener
Listener Functions:
Name: Channel: Level: Command:
processPoolHeat- 175
StateEvent
processPoolHeat- 174
StateEvent
processPoolHeat- 176
StateEvent
processPoolHeat- 177
StateEvent
processPoolHeatSta- 187
tusEvent
processPoolHeatSta- 188
tusEvent
processPoolLightOn- 172
Event
processPoolPumpOn- 170
Event
processPoolSet- 39
pointEvent
98
Constant: Notes:
SPA_SOLAR Momentary Function Channel: Set Spa heat state to solar
SPA_SOLAR_PREF Momentary Function Channel: Set Spa heat state to solar preferred
SPA_JETS_HI Momentary Function Channel: Set Spa jets to high
SPA_JETS_LO Momentary Function Channel: Set Spa jets to low
SPA_JETS_MED Momentary Function Channel: Set Spa jets to medium
SPA_JETS_OFF Momentary Function Channel: Set Spa jets to off
SPA_LIGHT_ON Discrete Function Channel: Spa light is on while channel is active
SPA_PUMP_ON Discrete Function Channel: Spa pump is on while channel is active
SPA_HEAT_LVL Set Spa setpoint, value is in degrees C or F depending on temperature scale
IPoolSpaComponentListener
Constant: Notes:
POOL_HEATER_FB Feedback Channel: Pool heater set to heat state, see state chart
POOL_HEAT_OFF_FB Feedback Channel: Pool heater set to off state, see state chart
POOL_SOLAR_FB Feedback Channel: Pool heater set to solar state, see state chart
POOL_SOLAR_PREF_FB Feedback Channel: Pool heater set to solar preferred state, see state chart
POOL_HEATING Feedback Channel: Pool heater status is heater, see state chart
POOL_HEATING_SOLAR Feedback Channel: Pool heater status is solar, see state chart
POOL_LIGHT_FB Feedback Channel: Pool light is on while channel is active
POOL_PUMP_FB Feedback Channel: Pool pump is on while channel is active
POOL_HEAT_LVL Pool setpoint changed, value is in degrees C or F depending on temperature scale
Standard NetLinx API (SNAPI) R 1.8.0