AMX CAFE DUET STANDARD NETLINX API (SNAPI) COMPONENTS AND LISTENERS Instruction Manual page 105

Listener Functions: (Cont.)
Name: Channel: Level: Command:
processPoolSpaAuxOn-
Event
processPoolSpaOut- 34
doorTemperatureEvent
processPoolSpaTemper-
atureScaleEvent
processPoolTemperatu- 41
reEvent
processSpaBlowerOn- 186
Event
processSpaHeat- 179
StateEvent
processSpaHeat- 178
StateEvent
processSpaHeat- 180
StateEvent
processSpaHeat- 181
StateEvent
processSpaHeatSta- 189
tusEvent
processSpaHeatSta- 190
tusEvent
processSpaJetsEvent 185
processSpaJetsEvent 183
processSpaJetsEvent 184
processSpaJetsEvent 182
processSpaLightOn- 173
Event
processSpaPumpOn- 171
Event
processSpaSet- 40
pointEvent
processSpaTemperatu- 42
reEvent
Standard NetLinx API (SNAPI) R 1.8.0
Constant:
POOLAUX-<aux number>,<state>
OUTDOOR_TEMP_LVL
POOLSCALE-<scale>
POOL_TEMP_LVL
SPA_BLOWER_FB
SPA_HEATER_FB
SPA_HEAT_OFF_FB
SPA_SOLAR_FB
SPA_SOLAR_PREF_FB
SPA_HEATING
SPA_HEATING_SOLAR
SPA_JETS_HI_FB
SPA_JETS_LO_FB
SPA_JETS_MED_FB
SPA_JETS_OFF_FB
SPA_LIGHT_FB
SPA_PUMP_FB
SPA_HEAT_LVL
SPA_TEMP_LVL
Notes:
Pool/Spa Aux state changed where <aux number> is the number of the aux relay 1 to x
where x is the maximum supported aux relay and <state> is 1 (on) or 0 (off) (see spe-
cific module documentation)
Outdoor air temperature changed, value is in degrees C or F depending on temperature
scale
Pool temperature scale changed, <scale> is FAHRENHEIT,CELSIUS
Pool temperature changed, value is in degrees C or F depending on temperature scale
Feedback Channel: Spa blower is on while channel is active
Feedback Channel: Spa heater set to heat state, see state chart
Feedback Channel: Spa heater set to off state, see state chart
Feedback Channel: Spa heater set to solar state, see state chart
Feedback Channel: Spa heater set to solar preferred state, see state chart
Feedback Channel: Spa heater status is heater, see state chart
Feedback Channel: Spa heater status is solar, see state chart
Feedback Channel: Spa jets state is high, see state chart
Feedback Channel: Spa jets state is low, see state chart
Feedback Channel: Spa jets state is medium, see state chart
Feedback Channel: Spa jets state is off, see state chart
Feedback Channel: Spa light is on while channel is active
Feedback Channel: Spa pump is on while channel is active
Spa setpoint changed, value is in degrees C or F depending on temperature scale
Spa temperature changed, value is in degrees C or F depending on temperature scale
99