AMX CAFE DUET STANDARD NETLINX API (SNAPI) COMPONENTS AND LISTENERS Instruction Manual page 170

Component Functions:
Name: Channel: Level: Command:
getZOrder()
pan(DOWN) 133
pan(LEFT) 134
pan(RIGHT) 135
pan(UP) 132
removeWindowCompo-
nent(index)
removeWindowCompo-
nent(windowAddress)
setBrightness(level) 10
setColor(level) 11
setContrast(level) 12
setFreezeOn(state) 214
setImage(source, pos,
size)
setImageSource(int)
setPictureMuteOn(state) 211
setSharpness(level) 13
setTint(level) 14
setWindow(pos,size)
setZOrder(position)
setZOrder(value)
zoomIn() 159
zoomOut() 158
164
Constant:
?WINDOWZORDER
PAN_DN
PAN_LT
PAN_RT
PAN_UP
WINDOWREMOVEIDX-<index>
WINDOWREMOVEADDR-
<address>
BRIGHT_LVL
COLOR_LVL
CONTRAST_LVL
PIC_FREEZE_ON
IMAGE-
<source>,<x>,<y>,<height>,<width>
IMAGESOURCE-<source>
PIC_MUTE_ON
SHARP_LVL
TINT_LVL
WINDOW-<x>,<y>,<height>,<width>
WINDOWZORDER-<position>
WINDOWZORDER-<value>
ZOOM_IN
ZOOM_OUT
Notes:
Get the Z-order. Responds with WINDOWZORDER-<value> where <value> is 1 to the
maximum z-order of the device, 1 is the top-most z-order (see specific module docu-
mentation)
Momentary Function Channel: Image is moved down one step within the window when
channel is activated
Momentary Function Channel: Image is moved left one step within the window when
channel is activated
Momentary Function Channel: Image is moved right one step within the window when
channel is activated
Momentary Function Channel: Image is moved up one step within the window when
channel is activated
Remove the window at index <index>, where <index> is 1 through x and x is the maxi-
mum supported window index (see specific module documentation)
Remove the window with address <address>, where <address> is a window address
Set brightness level, range is 0-255
Set color level, range is 0-255
Set contrast level, range is 0-255
Discrete Function Channel: Freeze is on while channel is active
Set the image source, position and size relative to the window where <source> is 1 to
the maximum source number (see specific module documentation) and <x> and <y>
are the window coordinates for the upper-left hand corner of the image and <height>
and <width> are the size of the image to be displayed in the window. Used to change
the position of the image visible in the window.
Set the image source for the window where <source> is 1 to the maximum source num-
ber (see specific module documentation)
Discrete Function Channel: Picture Mute is on while channel is active
Set sharpness level, range is 0-255
Set tint level, range is 0-255
Set the window position and size relative to the display where <x> and <y> are the dis-
play coordinates for the upper-left hand corner of the window and <height> and <width>
are the size of the window to be displayed in the display. Used to change the position
of the window visible in the display.
Shuffle the window z-order relative to the other windows where <postiion> is FRONT,
BACK, FORWARD (up one level), BACKWARD (down one level)
Set the Z-order where <value> is 1 to the maximum z-order of the device, 1 is the top-
most z-order (see specific module documentation)
Momentary Function Channel: Image size is enlarged within the window (zoom in/tele)
when channel is activated
Momentary Function Channel: Image size is reduced within the window (zoom out/win-
dow) when channel is activated
Standard NetLinx API (SNAPI) R 1.8.0