AMX CAFE DUET STANDARD NETLINX API (SNAPI) COMPONENTS AND LISTENERS Instruction Manual page 28

Component Functions: (Cont.)
Name: Channel: Level: Command:
setTiltRamp(DOWN) 133
setTiltRamp(UP) 132
setTiltSpeed(speed) 30
setZoom(zoom) 15
setZoomRamp(IN) 159
setZoomRamp(OUT) 158
setZoomSpeed(speed) 18
Listener
Name: Camera Listener
Interface: ICameraComponentListener
Listener Functions:
Name: Channel: Level: Command:
processAutoFocusEvent 162
processAutoIrisEvent 163
processCameraCompo-
nentCountEvent
processCameraPreset-
CountEvent
processCameraPre-
setEvent
processCameraPreset-
PropertiesEvent
processCameraPreset-
PropertyEvent
processFocusEvent 16
processFocusRampE- 161
vent
processFocusRampE- 160
vent
processFocusSpeedE- 19
vent
processIrisEvent 17
processIrisRampEvent 175
processIrisRampEvent 174
22
Constant:
TILT_DN
TILT_UP
TILT_SPEED_LVL
ZOOM_LVL
ZOOM_IN
ZOOM_OUT
ZOOM_SPEED_LVL
ICameraComponentListener
Constant:
AUTO_FOCUS_FB
AUTO_IRIS_FB
CAMERACOMPONENTCOUNT-
<count>
CAMERAPRESETCOUNT-<count>
CAMERAPRESET-<preset>
CAMERAPRESETPROPERTIES-
<index>,<displayName>,<value>[;-
<index>,<displayName>,<value>]
CAMERAPRESETPROPERTY-
<index>,<displayName>,<value>
FOCUS_LVL
FOCUS_FAR_FB
FOCUS_NEAR_FB
FOCUS_SPEED_LVL
IRIS_LVL
IRIS_CLOSE_FB
IRIS_OPEN_FB
Notes:
Ramping Channel: Tilt is ramped down while channel is active
Ramping Channel: Tilt is ramped up while channel is active
Set tilt speed, range is 0-255 (0=slow)
Set zoom position, range is 0-255 (0=out/Wide)
Ramping Channel: Zoom is ramped in (tele) while channel is active
Ramping Channel: Zoom is ramped out(wide) while channel is active
Set zoom speed, range is 0-255 (0=slow)
Notes:
Feedback Channel: Auto focus is on if channel is active
Feedback Channel: Auto iris is on if channel is active
Response to ?CAMERACOMPONENTCOUNT, where <count> is the integer number
of camera components
Response to ?CAMERAPRESETCOUNT, where <count> is the integer number of cam-
era presets
Camera preset changed, where <preset> is 1-x and x is the maximum supported preset
(see specific module documentation)
Response to ?CAMERAPRESETPROPERTIES
Response to ?CAMERAPRESETPROPERTY
Focus changed, range is 0-255 (0=near)
Feedback Channel: Focus is ramping far while channel is on
Feedback Channel: Focus is ramping near while channel is on
Focus speed changed, range is 0-255 (0=slow)
Iris changed, range is 0-255 (0=closed)
Feedback Channel: Iris is ramping closed while channel is on
Feedback Channel: Iris is ramping open while channel is on
Standard NetLinx API (SNAPI) R 1.8.0