Motor - AMX CAFE DUET STANDARD NETLINX API (SNAPI) COMPONENTS AND LISTENERS Instruction Manual

Motor

Component
Name: Motor
Interface: IMotorComponent
Component Functions:
Name: Channel: Level: Command:
cycleMotorPreset() 187
getMotorPreset()
setMotorDirec- 5
tion(CLOSE)
setMotorDirec- 4
tion(OPEN)
setMotorDirec- 2
tion(STOP)
setMotorPosition(posi-
tion)
setMotorPreset(preset)
Listener
Name: Motor Listener
Interface: IMotorComponentListener
Listener Functions:
Name: Channel: Level: Command:
processMotorDirection- 5
Event
processMotorDirection- 4
Event
processMotorDirection- 2
Event
processMotorPosition-
Event
processMotorPre-
setEvent
Standard NetLinx API (SNAPI) R 1.8.0
IMotorComponent
?MOTORPRESET
6
MOTORPRESET-<preset>
6
MOTORPRESET-<preset>
Constant: Notes:
MOTOR_PRESET Momentary Function Channel: Cycle Motor preset when channel is activated
Query for Motor preset, responds with MOTORPRESET-<preset>
MOTOR_CLOSE Momentary Function Channel: Set Motor direction to close, causing motor to move in
the CLOSE direction
MOTOR_OPEN Momentary Function Channel: Set Motor direction to open, causing motor to move in
the OPEN direction
MOTOR_STOP Momentary Function Channel: Set Motor direction to stop, causing motor to stop
between opened and closed
MOTOR_POS_LVL Recall Motor position, range is 0-255, 0 is close, 255 is open
Set Motor preset where <preset> is 1 through x where x is the maximum supported pre-
set (see specific module documentation)
IMotorComponentListener
Constant: Notes:
MOTOR_CLOSE_FB Feedback Channel: Motor direction is close, motor is moving to the CLOSE position or
is closed
MOTOR_OPEN_FB Feedback Channel: Motor direction is open, motor is moving to the OPEN position or is
open
MOTOR_STOP_FB Feedback Channel: Motor is stopped between opened and closed
MOTOR_POS_LVL Motor position changed, range is 0-255, 0 is close, 255 is open
Motor preset changed where <preset> is 1 through x where x is the maximum sup-
ported preset (see specific module documentation)
89