Wiring Guidelines - AMX AXB-PT101530 POSITRACK CAMERA CONTROLLER Instruction Manual

Positrack camera controllers
Table of Contents

Advertisement

FIG. 21 shows the location of each connector on the AXB-PT10/15.
FIG. 21 Control panel location on the AXB-PT10/15
The PosiTrack Controller receives all power from the +12 VDC and GND connections on the four-
pin AXlink connector.
When applying power to the AXB-PT10/15, adjust the soft-set pan/tilt limit stops to a
safe position to prevent camera or PosiTrack damage.

Wiring Guidelines

In most installations, the PosiTrack Controllers require local +12 VDC power to operate properly.
The maximum wiring distance between the power supply and the PosiTrack Controller is
determined by power consumption, supplied voltage, and the wire gauge used for the cable. The
following wiring table lists wire sizes and the maximum lengths allowable between the PosiTrack
units and the power supply. The maximum wiring lengths are based on a minimum of 13.5 VDC,
available at the power supply output.
The AXB-PT10 power rating is 2.6 A @ 12 VDC.
The AXB-PT15 power rating is 4 A @ 12 VDC.
The AXB-PT30 power rating is 6 A @ 12 VDC.
To reduce the possible effects of ground loop noise in the video, use a single-source power supply
mounted within distances specified in the following table.
Wiring Guidelines - PT10, PT15, PT30 (Based on a +12VDC Power Supply)
Wiring Guidelines - PT10 (2.6 A)
Wire size
18 AWG
20 AWG
22 AWG
24 AWG
AXB-PT10/15/30 PosiTrack Camera Controllers
AXB-PT10 (side view)
Wiring Guidelines - PT15 (4 A)
Max. wiring length
Wire size Max. wiring length
45.14 ft (13.76 m)
18 AWG
28.56 ft (8.71 m)
20 AWG
17.80 ft (5.43 m)
22 AWG
11.22 ft (3.42 m)
24 AWG
Control panel
LENS POWER
AMX
CAM
Wiring Guidelines - PT30 (6 A)
Wire size Max. wiring length
29.34 ft (8.94 m)
18 AWG
18.56 ft (5.66 m)
20 AWG
11.57 ft (3.53 m)
22 AWG
7.30 ft (2.22 m)
24 AWG
Installation
Camera control RS-232
DB-9 (male) connector
Lens control DB-15
high density (female)
connector
Lens Power switch
Pin 1 power switch for
DB-15 connector
AXlink 4-pin (male)
connector
Wire tie-mount
19.56 ft (5.96 m)
12.38 ft (3.77 m)
7.72 ft (2.35 m)
4.86 ft (1.48 m)
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents