Toshiba SD-H400-S-TU Installation Manual page 205

____ C_h_a_p_t_e_r_5
~---------
72
4. A title screen appears for ten seconds. When you see it, press your VCR's record
button.
5. When the program is over, press stop on your VCR.
Stopping or canceling Save to VCR:
You can stop or interrupt the transfer by going to live TV or to the TiVo menus. You can
also resume saving later. To stop or interrupt Save to VCR:
1. Press a button (for example, the TiVo button) that would interrupt Save to VCR. The
videotape icon appears.
2. While the icon is visible, press the same button again.
3. A confirmation screen appears. On the confirmation screen, select either "Stop saving
for now. Resume later." or "Cancel saving to VCR."
4. Press stop on your VCR as well.
To resume saving the program (unless you chose to cancel):
1. Go to Now Playing, select the program, and choose "Save to VCR" on the Program
Information screen.
2. Choose "Save from the paused location." A countdown screen appears.
3. To ensure that your VCR has time to begin recording, press record on your VCR
before the countdown gets to "1."
nvo
Central
l>
Now
Playing
l>
Program
l>
Save
to VCR