Selecting The Playback Function - Quick; Selecting The Playback Function - Toshiba SD-H400-S-TU Installation Manual

Selecting the Playback Function - QUICK -
~~
Selecting the Playback Function - QUICK -
Pressing one button can display a list of playback functions which are relevant to your current playback mode. You can check and modify them from the
list.
To program memory playback.
~
To select the repeat playback mode.
For the mode selections, see page
~.
At the beginning of a segment you want to repeat, press the
SELECT/ENTER button. Then at the end of the segment,
press the SELECT/ENTER button again. The segment is
played repeatedly.
~
To select the random playback mode.
For the mode selections, see page
~
.
To activate the bitrate display.
(Bit rate: data transfer rate (Mbit/s)
Refers to the amount of picture, sound and subtitle data in
the DVD video disc transferred per second.
The larger the value, the more data processed, but this does
not necessarily insure better picture quality.)
To activate the Text display.
Text display: Displays DVD-Text data or CD-Text data if
included on the disc.(Some content on the disc may not be
displayed properly depending on the disc.)
To quit the on-screen display.
23
Exit:
Random:
Bit Rate:
A-B (SetA):
Text:
5
Press SELECT/ENTER.
The on-screen display disappears and playback will
resume according to your selection.
Note
Pressing the QUICK button again also exits the on-screen display.
• Quickmenu
Memory:
Repeat:
e.g. To change to repeat mode:
4
Press ....
I
T to change the setting.
e.g. To select the title repeat mode:
2
Press ....
I
T
to select a desired item.
3
Press SELECT/ENTER.
, - - - - - - - - - - ,
~ Selecting the playback function n~1JI~VGO:'1!;;oo:~1
1
During playback, press QUICK.
The following on-screen display appears.
(The actual display will vary depending on the playback status.)
©
e.g......l)YD.i_<v_I -,