Related Manuals for Marquis ZCVRB47
Summarization of Contents
Unvented Chase VS Vented Chase Installation
Framed as Unvented Chase
Traditional fireplace installation into an unvented chase.
Framed as Vented Chase
Fireplace installed into a vented chase with various styles.
Facing Requirements
Finishing Recommendations
Recommendations from professional contractors and finishers for facing.
Other Notes on Facing
Additional notes regarding non-combustible board and paint.
Framing Your Gas Fireplace
Cold Climate Installation
Insulating outer walls and using Mylar sleeve for vent pipes in cold climates.
Vertical Venting in Cold Climates
Operating fireplace daily and using thermostat in cold weather.
Stand-off Locations
Identifying stand-off locations for framing boundaries.
Nailing Tab Guide
Drywall Flush with Fireplace Face
Nailing tabs for drywall flush with fireplace face and combustible materials.
Framing Flush with Fireplace Face
Nailing tabs for framing flush with non-combustibles for flat wall appearance.
Locating Your Appliance
Location Key
Key indicating different appliance placement locations like wall, corner, island.
Framing Dimensions – Unvented Chase
Framing for Horizontal Vent Termination
Diagram showing framing for horizontal vent termination.
Mantel Clearances – Unvented Chase
Mantel Leg Clearances
Diagram illustrating mantel leg clearances from adjacent walls.
Vented Chase - Removal of Ventilation Plates
Kingsman Enclosure Grills
Information on Kingsman enclosure grills compatible with Serene Series fireplaces.
Vented Chase – Style 1 – Opening with No Grill
Framing to Ceiling - Open Front No Grill
Framing requirements for an opening to the ceiling with no grill at the front.
Framing to Ceiling - Open Front and Back No Grill
Framing for openings to ceiling, front, and back, with no grills.
Framing to Ceiling - Open Sides No Grills
Framing for openings to ceiling and sides, with no grills.
Open Chase Framing - Enclosure Min 1-1/4" Below Ceiling
Chase framing with minimum 1-1/4" opening below ceiling.
Vented Chase – Style 2 – Opening with Grill
Framing to Ceiling - Grill at Front
Framing for a ceiling opening with a grill at the front.
Framing to Ceiling - Side Grills
Framing for ceiling openings with grills on the sides.
Framing to Ceiling - Grills at Front and Back
Framing for ceiling openings with grills at front and back.
Framing to Ceiling - Minimum Enclosure - Grill at Front
Minimum enclosure framing for a ceiling opening with a front grill.
V46EG Grill Installation
Parts List
List of components included for V46EG grill installation.
Installation
Step-by-step instructions for installing the V46EG grill.
VL60EGS Side Grill Installation
Contents of Kit
Details of the kit contents for VL60EGS side grill installation.
Suggested Framing for VL60EGS Side Grills
Recommended framing for side grill installations.
Framing Dimensions – Vented Chase - Ventilation Plates Removed
Optional Recess Framing
Framing dimensions for an optional recessed installation.
Recessed to Ceiling Framing
Framing dimensions for a recessed-to-ceiling installation.
No Recess Framing
Framing dimensions for installations with no recess.
Mantel Clearances – Vented Chase
Mantel Leg Clearances
Diagram showing mantel leg clearances for vented chase.
Need help?
Do you have a question about the ZCVRB47 and is the answer not in the manual?
Questions and answers