ANCEL DS200 User Manual

This product is an automotive diagnostic device based on the Android operating system. It connects to vehicles via
a diagnostic cable to communicate with the vehicle's various electronic control systems, obtaining operational
data. This data provides a basis for vehicle maintenance and repair. The product includes three software
configurations, each corresponding to different software functionalities.
1.Product Introduction
1. I/O Port: Connect the device to the vehicle's diagnostic port [OBD] using the diagnostic cable.
2. Power Button: Press and hold for 3 seconds to power on or display the shutdown prompt; press for 1 second
to turn off the screen.
3. Screen: 5-inch touchscreen; after powering on, all diagnostic operations can be performed by pressing the
screen menu.
4. USB Port: Type-C, used for charging and data transfer. Please use a power adapter with a 5V output for
charging.
2.Product Parameter
CPU：Quad-core 1.3GHz
Memory：2GB+32GB
Screen：5 inches 854*480
Working Voltage: 5V
Working Current: ≤ 2.5A
Working Environment: 0°C ~ 50°C (32°F ~ 122°F)
Software Configuration:
DS160: Full functionality for a single vehicle brand. Currently available for Ford, KIA, Benz, and Porsche.
DS100: Supports 100+ vehicle models for diagnosing 4 ECUs (ECM, TCM, ABS, SRS). Only basic functions are
available, including reading fault codes, clearing fault codes, reading ECU ID information, and reading data
streams.It includes 7 maintenance functions, namely ABS Bleeding, Battery Matching, Brake Reset, Electric
Throttle Relearn,Oil Maintenance Reset, Steering Angle Reset, and Gear Learn.
DS160 &DS100&DS200
User Manual