Advertisement
Quick Links
User Manual
DA1453x Pro-Development Kit
Hardware Description
UM-B-169
Abstract
Renesas DA1453x Pro-development kit supports the family of DA1453x SoC. This user manual
describes the system functions of the hardware as well as the guidelines of how to enable or disable
features of the DA1453x Pro-development kit.
Advertisement
Related Manuals for Renesas DA14531 WLCSP17 Pro-DB
Summarization of Contents
Introduction
Features of DA1453x Pro-DB
Lists features of the DA1453x Pro-DB, including embedded antenna and RF port.
Features of DA1453x Pro-MB
Lists features of the DA1453x Pro-MB, including slots for daughterboards and PMM2.
DA1453x Pro-Devkit hardware block diagram
Provides a block diagram of the complete DA1453x Pro-Devkit system.
Getting to Know DA1453x Pro-Devkit
DA1453x Pro-Devkit hardware components
Lists the main hardware components of the DA1453x Pro-Devkit, including Pro-MB and Pro-DB variants.
Jumper settings
Details the default jumper settings for the DA1453x Pro-Daughterboard and Pro-Devkit.
DA1453x Pro-Devkit default setup
Describes the default hardware configuration and enabled features of the DA1453x Pro-Devkit.
DA1453x Pro-DB
Power section of Pro-DB
Explains the Pro-DB power supply modes (Buck, Boost) and voltage options.
RF section
Details the RF section of the DA1453x Pro-DB, including antenna and measurement modifications.
R-Multiplexer
Describes the R-Multiplexer for GPIO assignment flexibility and potential software modifications.
SPI Data flash on Pro-DB
Discusses the optional SPI flash support on DA14533/DA14535 Pro-DB and default configuration.
DA1453x Pro-MB
Power section
Describes the power tree of the DA1453x Pro-MB and its components.
USB HUB
Describes the USB HUB functionality implemented by the USB2512B chip (U11).
USB to UART
Details the USB to UART function provided by the FT2232HL chip (U12).
USB to JTAG
Explains the USB to JTAG function implemented by the R7FA4M2AD3CFL chip (U25).
Reset function
Describes the reset functionality and how it's assigned and handled.
UART configuration
Explains UART configuration, supporting single-wire, two-wire, and flow control modes.
JTAG configuration
Details the JTAG configuration using SWD protocol and signal assignments.
Measurements and software triggers
Explains how to monitor system current and voltages using the PMM2 module and software triggers.
The Power Measurement Module 2 (PMM2), (500-29-x)
Accuracy of current measurement for VBAT system (VLDO)
Details the accuracy of the PMM2 module for VBAT current measurements in different modes.
Appendix A Schematics
DA1453x Pro motherboard (610-01-B), schematic.
Provides the schematic diagram for the DA1453x Pro motherboard (610-01-B).
DA14535 Pro daughterboard (610-02-A), schematic.
Provides the schematic diagram for the DA14535 Pro daughterboard (610-02-A).
DA14533 Pro daughterboard (610-05-A), schematic.
Provides the schematic diagram for the DA14533 Pro daughterboard (610-05-A).
PMM2, Power measurement module (500-29-E), schematic
Provides the schematic diagram for the PMM2 module (500-29-E).
Need help?
Do you have a question about the DA14531 WLCSP17 Pro-DB and is the answer not in the manual?
Questions and answers