Advertisement
Quick Links
© Panduit Corp. 2017
READ ALL INSTRUCTIONS COMPLETELY BEFORE PROCEEDING
CONNECTOR ASSEMBLY
SIMPLEX
FLCSMCXAQY
FLCSMC5BLY
FLCSMC6BLY
FLCSSCBUY
DUPLEX
FLCDMCXAQY
FLCDMC5BLY
FLCDMC6BLY
FLCDSCBUY
Table 1
Standard LC OptiCam Connectors*
Backbone
Boot
Fiber Type
Color
Color
10Gig 50µm
Aqua
Aqua
50µm
Black
Black
62.5µm
Electric Ivory
Black
Singlemode
Blue
*Part numbers shown above
ITEMS REQUIRED FOR TERMINATION
ITEM
PART NUMBER
1
OCTT
2
FLCC
3
FVFLPC-1.25SMY
4
CST-115
5
FALC
6
FBFSP
7
FJQCVR
8
FGLS
9
FKS
10
FSTY
11
FSWB-C
12
FWP-C
13
PFX-0
14
--
OPTIONAL
FS115**
OPTIONAL
FJQCVRB
**Denotes revision letter.
For Technical Support: www.panduit.com/resources/install_maintain.asp
Part Numbers: FLCSMCXAQY, FLCDMCXAQY, FLCSMC5BLY, FLCSSCBUY,
Keyed Part Numbers: SEE TABLE BELOW
INSTALLATION INSTRUCTIONS
COMPONENT IDENTIFICATION
Connector Body
Dust Cap
Key Type - Backbone Color
Multimode Part Numbers
Singlemode Part Numbers
Key Type - Backbone Color
Multimode Part Numbers
Singlemode Part Numbers
Blue
Key Type - Backbone Color
Multimode Part Numbers
Singlemode Part Numbers
‡
For duplex connectors, replace the first S in the part number (FLCSSCABL) with a D (FLCDSCABL).
^Substitute for multimode fiber type: 6 = 62.5/125µm OM1, 5 = 50/125µm OM2, or X = 10Gig 50/125µm OM3.
DESCRIPTION
OptiCam Termination Tool
LC Cradle for OptiCam Termination Tool (OCTT)
1.25mm Universal Patch Cord for OptiCam Termination Tool (OCTT)
Fiber Cable Jacket Stripper
Alcohol Bottle (empty)
Fiber Buffer Stripper
Fiber Cleaver Tool
Safety Glasses
Fiber Kevlar Shears
Fiber Safety Tab Stickers for fiber scraps
Cleaning Swabs
Lint-Free Wipes
Fine-Tip Marking Pen
Isopropyl Alcohol (Reagent Grade, 90% minimum concentration; not available from Panduit)
LC OptiCam Connector Stripping Template
Replacement Blade for Fiber Cleaver
LC OptiCam
Fiber Optic Connectors
FLCDMC5BLY, FLCSMC6BLY, FLCDMC6BLY, FLCDSCBUY
900µm Buffered Boot
Duplex Clip
Keyed LC OptiCam Simplex Connector Part Numbers
A - Black
B - Red
FLCSMC^ABL
FLCSMC^BRD FLCSMC^CGR FLCSMC^DYL FLCSMC^EOR FLCSMC^FDB
FLCSSCABL
FLCSSCBRD
G - Violet
H - Aqua
FLCSMC^GVL
FLCSMC^HAQ FLCSMC^JRO FLCSMC^KIG FLCSMC^LLB FLCSMC^PWT
FLCSSCGVL
FLCSSCHAQ
Q - Charcoal
R - Lavender
FLCSMC^QCG
FLCSMC^RLV FLCSMC^SPE FLCSMC^TSB FLCSMC^VMA FLCSMC^WMI
FLCSSCQCG
FLCSSCRLV
Page 1 of 23
Backbone
Table 2
‡
and Configurations
C - Green
D - Yellow
FLCSSCCGR
FLCSSCDYL
J - Rose
K - Slate
FLCSSCJRO
FLCSSCKIG
S - Peach
T - Steel Blue
FLCSSCSPE
FLCSSCTSB
FS014C
Jacketed Boots
Available Separately
3.0mm Boot
FMCBT3AQ-X
FMCBT3BL-X
FSCBT3BU-X
1.6 - 2.0mm Boot
FMCBT2AQ-X
FMCBT2BL-X
FSCBT2BU-X
E - Orange
F - Dark Blue
FLCSSCEOR
FLCSSCFDB
L - Brown
P - White
FLCSSCLLB
FLCSSCPWT
V - Maroon
W - Mint
FLCSSCVMA
FLCSSCWMI
Advertisement
Related Manuals for Panduit FLCSSCBUY
Summarization of Contents
COMPONENT IDENTIFICATION
CONNECTOR ASSEMBLY
Details the different types of connector assemblies, including simplex and duplex configurations.
SAFETY PRECAUTIONS
SAFETY GLASSES
Emphasizes wearing safety glasses when handling bare optical fiber due to sharp edges.
ISOPROPYL ALCOHOL
Warns about flammability and eye irritation from isopropyl alcohol.
DISPOSAL OF BARE FIBERS
Instructs on safe disposal of bare fiber pieces to prevent injury.
LASER LIGHT
Provides warnings and precautions regarding laser light exposure.
CABLE HANDLING
Warns about potential damage to fiber optic cable from stress.
OptiCam Termination Tool Patch Cord Maintenance
CLEANING PROCEDURE
Details the process of cleaning ST connector ferrule endface and adapter end.
250µm Coated Fiber Termination with Build-up Tube
ATTACH PATCH CORD TO OCTT
Connects the VFL patch cord to the OCTT laser aperture.
INSERT CONNECTOR CRADLE
Inserts the LC cradle into the OCTT cradle holder.
INSERT CONNECTOR INTO CRADLE
Places the connector body into the LC Cradle.
ATTACH PATCH CORD TO CONNECTOR FERRULE
Connects the VFL patch cord to the connector ferrule.
STRIP 250µm COATED FIBER
Removes the 250µm buffer coating from the fiber.
CLEAVE 250µm COATED FIBER
Cleaves the stripped fiber to the correct length.
INSERT FIBER
Inserts the cleaved fiber into the connector.
CLAMP CABLE
Clamps the fiber cable in the OCTT clamps.
TURN ON LASER
Activates the laser on the OCTT tool for testing.
CAM THE CONNECTOR
Rotates the connector body to engage the cam mechanism.
TURN OFF LASER
Deactivates the laser on the OCTT tool.
PLACE DUST COVER ON PATCH CORD
Applies a protective dust cover to the patch cord.
UNCLAMP CABLE
Releases the cable from the OCTT clamp arms.
REMOVE CONNECTOR FROM CRADLE
Safely removes the terminated connector from the cradle.
REMOVE FIBER FROM CLEAVER TOOL
Removes the fiber scrap from the cleaver tool.
ASSEMBLE CONNECTOR AND BOOT
Attaches the boot to the connector backbone.
ATTACH DUPLEX CLIP
Connects two single connectors together using a duplex clip.
RE-TERMINATION
Details the process for re-terminating a connector if needed.
250µm Coated Fiber Termination using Opticom Fanout Kit
ATTACH PATCH CORD TO OCTT
Connects the VFL patch cord to the OCTT laser aperture.
INSERT CONNECTOR CRADLE
Inserts the LC cradle into the OCTT cradle holder.
INSERT CONNECTOR INTO CRADLE
Places the connector body into the LC Cradle.
ATTACH PATCH CORD TO CONNECTOR FERRULE
Connects the VFL patch cord to the connector ferrule.
INSTALL FANOUT KIT AND STRIP FIBER
Installs the fanout kit and strips the 250µm coated fiber.
CLEAVE 250µm COATED FIBER IN FANOUT KIT
Cleaves the stripped fiber within the fanout kit assembly.
INSERT FIBER
Inserts the cleaved fiber into the connector.
CLAMP CABLE
Clamps the fiber cable in the OCTT clamps.
SHUTTLE CRADLE HOLDER
Adjusts the cradle holder to create a bow in the fiber.
TURN ON LASER
Activates the laser on the OCTT tool for testing.
CAM THE CONNECTOR
Rotates the connector body to engage the cam mechanism.
TURN OFF LASER
Deactivates the laser on the OCTT tool.
PLACE DUST COVER ON PATCH CORD
Applies a protective dust cover to the patch cord.
UNCLAMP CABLE
Releases the cable from the OCTT clamp pads.
REMOVE CONNECTOR FROM CRADLE
Safely removes the terminated connector from the cradle.
REPOSITION CRADLE HOLDER
Moves the cradle holder back to the pre-termination position.
REMOVE FIBER FROM CLEAVER TOOL
Removes the fiber scrap from the cleaver tool.
ASSEMBLE CONNECTOR AND BOOT
Attaches the boot to the connector backbone.
ATTACH DUPLEX CLIP
Connects two single connectors together using a duplex clip.
RE-TERMINATION
Details the process for re-terminating a connector if needed.
900µm Tight-Buffered Fiber Termination
ATTACH PATCH CORD TO OCTT
Connects the VFL patch cord to the OCTT laser aperture.
INSERT CONNECTOR CRADLE
Inserts the LC cradle into the OCTT cradle holder.
INSERT CONNECTOR INTO CRADLE
Places the connector body into the LC Cradle.
ATTACH PATCH CORD TO CONNECTOR FERRULE
Connects the VFL patch cord to the connector ferrule.
STRIP 900µm TIGHT-BUFFERED FIBER
Removes the 900µm buffer coating from the fiber.
CLEAVE 900µm TIGHT-BUFFERED FIBER
Cleaves the stripped fiber to the correct length.
INSERT FIBER
Inserts the cleaved fiber into the connector.
CLAMP CABLE
Clamps the fiber cable in the OCTT clamps.
SHUTTLE CRADLE HOLDER
Adjusts the cradle holder to create a bow in the fiber.
TURN ON LASER
Activates the laser on the OCTT tool for testing.
CAM THE CONNECTOR
Rotates the connector body to engage the cam mechanism.
TURN OFF LASER
Deactivates the laser on the OCTT tool.
PLACE DUST COVER ON PATCH CORD
Applies a protective dust cover to the patch cord.
UNCLAMP CABLE
Releases the cable from the OCTT clamp pads.
REMOVE CONNECTOR FROM CRADLE
Safely removes the terminated connector from the cradle.
REPOSITION CRADLE HOLDER
Moves the cradle holder back to the pre-termination position.
REMOVE FIBER FROM CLEAVER TOOL
Removes the fiber scrap from the cleaver tool.
ASSEMBLE CONNECTOR AND BOOT
Attaches the boot to the connector backbone.
ATTACH DUPLEX CLIP
Connects two single connectors together using a duplex clip.
RE-TERMINATION
Details the process for re-terminating a connector if needed.
Jacketed Cable Termination
ATTACH PATCH CORD TO OCTT
Connects the VFL patch cord to the OCTT laser aperture.
INSERT CONNECTOR CRADLE
Inserts the LC cradle into the OCTT cradle holder.
INSERT CONNECTOR INTO CRADLE
Places the connector body into the LC Cradle.
ATTACH PATCH CORD TO CONNECTOR FERRULE
Connects the VFL patch cord to the connector ferrule.
STRIP JACKETED CABLE
Strips the jacket and buffer from the jacketed cable.
CLEAVE 900µm TIGHT-BUFFERED FIBER
Cleaves the stripped fiber to the correct length.
INSERT FIBER
Inserts the cleaved fiber into the connector.
CLAMP CABLE
Clamps the fiber cable in the OCTT clamps.
TURN ON LASER
Activates the laser on the OCTT tool for testing.
CAM THE CONNECTOR
Rotates the connector body to engage the cam mechanism.
TURN OFF LASER
Deactivates the laser on the OCTT tool.
PLACE DUST COVER ON PATCH CORD
Applies a protective dust cover to the patch cord.
UNCLAMP CABLE
Releases the cable from the OCTT clamp pads.
REMOVE CONNECTOR FROM CRADLE
Safely removes the terminated connector from the cradle.
REMOVE FIBER FROM CLEAVER TOOL
Removes the fiber scrap from the cleaver tool.
ASSEMBLE CONNECTOR AND BOOT
Attaches the boot to the connector backbone.
ATTACH DUPLEX CLIP
Connects two single connectors together using a duplex clip.
RE-TERMINATION
Details the process for re-terminating a connector if needed.
Need help?
Do you have a question about the FLCSSCBUY and is the answer not in the manual?
Questions and answers