Advertisement
Quick Links
© Panduit Corp. 2004
Industrial Jack
CJSI5E88T / CJI5E88T
Seal Gasket
Options
Keyed Thrust
Washer
Nut
1
11/64"
(4.4mm)
43/64"
(17.1mm)
1 7/8"
(47.6)
* min. spacing
* Allow more spacing as needed
when using tethered cap option.
Bulkhead opening requirements.
For Technical Support: www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
Bulkhead w/
Face Seal
Shielded Jack
(For CJSI5E88T)
UTP Jack
Seal
(For CJI5E88T)
Seal w/ Tethered
Cap
Installation for Industrial Jack
1 7/8"
(47.6)
min. spacing
Ø 1/4"
(6.4mm)
9/16"
(14.3mm)
Orient key way
as needed
{not to scale}
Ø 1 13/64"
(30.6mm)
Industrial TX5e Connector
Part Numbers: CJSI5E88T, CJI5E88T, MPSI588T, MPI588T
PN318F
Shielded Plug
(For MPSI588T)
2
Optional
Choose one of the two Seal Gaskets provided.
Page 1 of 4
Industrial Plug
MPSI588T / MPI588T
Plug Holder
UTP Plug
(For MPI588T)
(Optional)
Tethered Cap w/
Face Seal
(OR)
Flex Tail
Advertisement
Related Manuals for Panduit TX5e
Summary of Contents for Panduit TX5e
- Page 1 Industrial TX5e Connector Part Numbers: CJSI5E88T, CJI5E88T, MPSI588T, MPI588T INSTALLATION INSTRUCTIONS PN318F © Panduit Corp. 2004 Industrial Jack Industrial Plug CJSI5E88T / CJI5E88T MPSI588T / MPI588T Bulkhead w/ Face Seal Flex Tail Shielded Jack Plug Holder (For CJSI5E88T) Seal Gasket...
- Page 2 Max. thickness - .090" Terminate jack. Insert Bulkhead into prepared opening from outside of See PANDUIT Instruction Sheet PN120* for jack enclosure. Secure with Keyed Thrust Washer and Nut Termination Instructions. on the inside of enclosure. Torque Nut to 20 in-lbs.
- Page 3 Optional Tethered Cap Terminate Plug. Slide Flex Tail onto cable and route See PANDUIT Instruction Sheet PN85* for Termination cable through rear of Plug Housing. Instructions of UTP Plug, or PNR234* for Shielded Plug. Properly seat plug into Plug Housing opening. Twist on the Flex Tail.
- Page 4 Installation for Industrial Plug to Industrial Jack Enclosure Wall or Outlet Plate Plug removed from view for clarity Align key w/ keyway E-mail: For Instructions in Local Languages cs@panduit.com and Technical Support: Fax: www.panduit.com/resources/install_maintain.asp www.panduit.com (708) 444-6993 Page 4 of 4...