Related Manuals for HPE CS7000
Summarization of Contents
Install the HPE Nimble Storage Array
Network Considerations
Information to help plan HPE storage array installation, including network topology and IP addressing.
Installation Checklist
A list of information required from network administrators for array installation and configuration.
Rack Mount Safety Precautions
Safety measures to observe when installing the HPE Nimble Storage array or expansion shelf in a rack.
Initial Setup Using the Nimble Setup Manager
Guide to configuring basic settings using the Nimble Setup Manager (NSM) for initial array setup.
Initial Setup Using the Array CLI
Instructions for completing the initial array setup using the Command Line Interface (CLI).
Array Components
Array Front Panel
Description of the slot designations and physical layout of the array's front panel.
Array Rear Panel
Overview of the rear panel components, including controllers, power supplies, and port connections.
Controller States and Status
Explanation of controller states like Active, Standby, Solo, Unknown, and Stale.
Array LEDs
Details on the function and status indicators of the array's front panel LEDs.
Maintenance Procedures
Drive Maintenance
Procedures for maintaining hard disk drives (HDDs) and solid state drives (SSDs) in arrays and expansion shelves.
Replace a Failed Drive
Step-by-step guide for replacing a failed HDD or SSD in the HPE storage array or expansion shelf.
Controller Maintenance
Procedures for replacing components on a controller, such as NICs, HBAs, or mid-plane fans.
Replace a Controller
Detailed instructions for replacing a controller in the HPE storage array.
Power Supply Maintenance
Procedures for maintaining and replacing power supply units (PSUs) in arrays and expansion shelves.
Upgrade Procedures
Upgrade the Controller
Procedure to upgrade controllers in your HPE storage array to newer models or versions.
Upgrade Cache
Steps to add new SSDs to the HPE Nimble Storage array or expansion shelf to increase cache capacity.
Upgrade a PCIe Card
Procedure to upgrade NICs or HBAs by replacing existing cards with newer models.
Upgrade HDDs
Procedure to add HDDs to your HPE Nimble Storage Adaptive Flash array for increased capacity.
Hardware and Model Specifications
Hardware Specifications
General and model-specific physical specifications, including dimensions, weight, and environment.
Model Specifications
Specific details on array and expansion shelf models, including supported transceivers.
Statement of Volatility
Identification of volatile and non-volatile devices within HPE Nimble Storage products.
Troubleshooting
Check System Temperature
Guide to checking storage array and expansion shelf temperatures to prevent overheating.
Regulatory and Safety Information
Regulatory Warnings
Description of all regulatory warnings applicable to Nimble Storage arrays by region.
Safety Warnings
General safety warnings that apply to all HPE storage arrays.
Electrical Safety
Basic electrical safety precautions for AC and DC power to protect users and equipment.
Need help?
Do you have a question about the CS7000 and is the answer not in the manual?
Questions and answers