Boot Sequence - TYAN TOMCAT I7221 User Manual

Tomcat i7221 S5150
In addition, MPS 1.4 introduces support for a secondary PCI bus without requiring a PCI
bridge.
1.1 / 1.4
This option cannot be changed if APIC Mode is set to Disabled.

3.4.2 Boot Sequence

This setting controls the order that the BIOS uses to look for a boot device from which to load
the operating system during the boot process. The boot sequence options are as follows.
First, Second, and Third Boot Devices
These indicate the boot priority. For example if the First Boot Device is set as Removable, the
Second Boot Device as CDROM, and the Third Boot Device as Hard Disk, then the system
will try to boot from a removable drive, failing which it will try to boot from a CDROM, and if this
also fails, it will try to boot from the Hard Disk.
Boot Other Device
This option allows the system to boot from any other bootable device.
Enabled / Disabled
Removable Device Priority
This setting controls the order that the BIOS uses to look for a removable boot device from
which to load the operating system during the boot process. The removable boot sequence
options are as follows.
Note
3-10
http://www.tyan.com
Chapter 3: BIOS Setup