TYAN TOMCAT I7221 User Manual page 66

Tomcat i7221 S5150
Create RAID 0 or RAID 1 Volume
The following procedure should only be used with a newly-built system or
if you are reinstalling your operating system. The following procedure
should not be used to migrate an existing system to RAID 0.
After pressing the <Ctrl> and <i> keys simultaneously, the following window will appear:
1. Select option 1 'Create RAID Volume' and press the <Enter> key and the following window
will appear:
Chapter 4: SATA/RAID Setup (for SATA RAID model)
Intel (R) Application Accelerator RAID Option ROM v4.0.0.6211
Copyright (C) 2003-04 Intel Corporation. All Rights Reserved.
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
4. Exit
RAID Volumes:
None defined.
Physical Disks:
Port Drive Model Serial #
0 WDC WD360CD-00FN WD-WMAH91105870
3 WDC WD360CD-00FN WD-WMAH91063877
[ ]-Select
Intel (R) Application Accelerator RAID Option ROM v4.0.0.6211
Copyright (C) 2003-04 Intel Corporation. All Rights Reserved.
Name: RAID_Volume0
RAID Level: RAID0(Stripe)
Disks: Select Disks
Strip Size: 128KB
Capacity: 68.9 GB
Enter a string between 1 and 16 characters in length that can be used
to uniquely identify the RAID volume. This name is case sensitive and
can not contain special characters.
[ ]-Change [TAB]-Next
http://www.tyan.com
Note
Size
34.4GB
34.4GB
[ESC]-Exit [ENTER]-Select Menu
Create Volume
[ESC]-Previous Menu
4-5
Type/Status(Vol ID)
Non-RAID Disk
Non-RAID Disk
[ENTER]-Select