Boot Sequence - TYAN TOMCAT I915 User Manual

Tomcat i915 S5120
Select the MPS version depending on the operating system installed: select 1.1 for Win NT
3.52, and 1.4 for Win NT4.0, Win2000, and WinXP.
•
1.1
•
1.4
Quick Power On Self Test
This option allows the system to skip self-tests for faster startup.
•
Enabled
•
Disabled

3.4.2 Boot Sequence

This setting controls the order that the BIOS uses to look for a boot device from which to load
the operating system during the boot process. The boot sequence options are as follows.
Removable Device Priority
This setting controls the order that the BIOS uses to look for a removable boot device from
which to load the operating system during the boot process. The removable boot sequence
options are as follows.
This option cannot be changed if APIC Mode is set to Disabled.
http://www.tyan.com
Note
3-8
Chapter 3: BIOS Setup