Native Mode Operation
This feature is used to choose Native Mode for ATA. However, certain OS is not
supported under Native Mode.
Options: Auto / Serial ATA
SATA Controller Mode Option
This feature is used to select SATA controller mode. In "compatible mode", SATA
and PATA drives are auto-detected and placed in Legacy mode. In "Enhanced
(non-AHCI) mode", SATA and PATA drives are auto-detected and placed in Native
IDE mode.
Options: Compatible / Enhanced (non-AHCI)
3.4.1.1 Integrated Device Control Sub-Menu
Advanced
Integrated Device Control Sub-Menu
USB - Device 29, Function 3:
USB - Device 29, Function 2 & 3:
USB - Device 29, Function 1 & 2 & 3:
USB - Device 29, Function 0 & 1 & 2 & 3:
USB - Device 29, Function 7:
F1
Help
Select Item
↑↓
Esc
Exit
Select Menu
USB Device 29, Function 3:
Controls the listed USB functions by setting the item to the desired value.
Options: Enabled / Disabled
USB Device 29, Function 2 & 3:
Controls the listed USB functions by setting the item to the desired value.
Options: Enabled / Disabled
USB Device 29, Function 1 & 2 & 3:
Controls the listed USB functions by setting the item to the desired value.
Options: Enabled / Disabled
USB Device 29, Function 0 & 1 & 2 & 3:
Controls the listed USB functions by setting the item to the desired value.
Options: Enabled / Disabled
USB Device 29, Function 7:
Controls the listed USB functions by setting the item to the desired value.
Options: Enabled / Disabled
i82551 Option ROM Scan:
PhoenixBIOS Setup Utility
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
-/+
Change Values
Enter
Select
Sub-Menu
45
http://www.tyan.com
Item Specific Help
Enable or disable this
USB device by setting
item to the desired
value.
F9
Setup Defaults
F10
Save and Exit