TYAN TOLEDO I3010W Manual page 16

2.4.7 – Front Panel LAN1/LAN2 Link and Active LED Connector: J32 ~ J35
The external LED's for J32 and J34
can be either bi-color or single-color
LED.
For a single-color LED to indicate
1000Mbps SPEED, connect Pin 1 to
LED+ and Pin 2 to LED-.
J35 J35 is for connecting an
external LED to indicate LAN2
LINK and ACTIVITY. The
1
behavior of this LED is the
same as LAN2 RJ45 LED2:
Pin 1: LED+
Pin 2: LED-
J32
J32 is for connecting an
external LED to indicate LAN1
LINK and ACTIVITY. The
1
behavior of this LED is the
same as LAN1 RJ45 LED2:
Pin 1: LED+
Pin 2: LED-
J34 J34 is for connecting an
external LED to indicate LAN2
SPEED. The behavior of this
1
LED is the same as LAN2
RJ45 LED1:
Pin 1: 100 Mbps- (Low Active)
Pin 2: 1000 Mbps- (Low
Active)
J33
J33 is for connecting an
external LED to indicate LAN1
SPEED. The behavior of this
1
LED is the same as LAN1
RJ45 LED1:
Pin 1: 100 Mbps- (Low Active)
Pin 2: 1000 Mbps- (Low
Active)
16
http://www.tyan.com