TYAN TOLEDO I3010W Manual page 42

Boot-time Diagnostic Screen
This feature is used to display the diagnostic screen during the boot process.
Options: Enabled / Disabled
Quick Boot Mode
This BIOS feature allows you to decrease the time it takes to boot up the computer
by shortening or skipping certain standard booting procedures.
If enabled, the BIOS will shorten the booting process by skipping some tests and
shortening others. In addition, it will also perform the following to further speed up
the booting process:
Spin up the hard disks as soon as power is supplied (or as soon as possible)
Initialize only critical parts of the chipset
Read memory size from the SPD (Serial Presence Detect) chip on the memory
modules
Eliminate logo delays
If disabled, the BIOS will run the whole gamut of boot-up tests.
It is recommended that you disable this feature when you boot up a new computer
for the first time or whenever you install a new piece of hardware. This allows the
BIOS to run full diagnostic tests to detect any problems that may slip past Quick
Boot's abbreviated testing scheme.
After a few error-free test runs, you should enable this feature for much faster
booting.
Options: Enabled / Disabled
42
http://www.tyan.com