TYAN TOLEDO I3010W Manual page 44

this option to DOS if such a hard drive is present. Else, set this option to Other.
Virtually, all modern hard disks have these characters so leave this option at DOS,
unless you know otherwise.
Options: DOS / Other
Route Port 80h cycles to
This feature allows you to route Port 80h I/O cycles to LPC or PCI bus.
Options: LPC / PCI
Legacy USB Support
When enabled, the BIOS takes control of the USB ports. Enable this only if you run
an OS that does not support USB (e.g. DOS) or when you have USB hardware like
USB mice that you want to use even before the operating system loads.
Options: Enabled / Disabled
3.4.1 Advanced Chipset Control
This section allows you to fine tune the chipset configuration.
Advanced
Advanced Chipset Control
Integrated Device Control Sub-Menu
PCI Express Sub-Menu
Onboard VGA Control
PXH Bus Frequency Control
Spread Spectrum
Parallel ATA:
Serial ATA:
Native Mode Operation:
SATA Controller Mode Option:
F1 Help Select Item
↑↓
Esc Exit Select Menu
PHX Bus Frequency Control
It is used to select the PHX bus frequency.
Options: 100MHz / 133MHz
Parallel ATA
This feature is used to enable the PATA function.
Options: Enabled / Disabled
Serial ATA
This feature is used to enable the SATA function.
Options: Enabled / Disabled
PhoenixBIOS Setup Utility
[Enabled]
[133MHz]
[Disabled]
[Enabled]
[Enabled]
[Auto]
[Compatible]
-/+ Change Values
Enter Select Sub-Menu
44
http://www.tyan.com
Item Specific Help
These items determine
whether the integrated
PCI Devices will be
Enabled in PCI Config
Space.
F9 Setup Defaults
F10 Save and Exit