Installing The Memory - TYAN TOLEDO I3010W Manual

2.6 - Installing the Memory

Before installing memory, ensure that the memory you have is compatible with the
motherboard and processor. Only DDRII-667/533 DIMM modules are required.
Check the TYAN Web site at: www.tyan.com for details of the type of memory
recommended for your motherboard.
The following diagram shows common types of DDRII memory modules.
Key points to note before installing memory:
For optimal dual-channel DDRII operation, always install memory in
pairs beginning with DDRII2 and DDRII4. Memory modules of the same
type and density are required for dual-channel DDRII operation.
Mismatched memory may cause system instability.
•
Only DDRII 667/533 un-buffered ECC/non-ECC memory modules are
supported.
•
All installed memory will automatically be detected and no jumpers or
settings need changing.
Refer to the following table for supported DDRII populations.
(Note: X indicates a populated DIMM slot)
Population Option
DDRII1
DDRII2
DDRII3
DDRII4
1 2
x
x x
x
x x
23
http://www.tyan.com