Alcatel-Lucent OMNIACCESS 740 Hardware User's Manual page 41

C AC I P
ONNECTING NPUT
Warning: When installing the system, the ground connection must always be made first and
disconnected last.
Figure 11: Connecting Power Cord
•
Use the specified power cord to power your system.
•
Connect the system end of the connector to the OA-740, as shown in above
figure.
•
Connect the power plug to the utility power socket.
•
Be sure that the power cable is not left in a hazardous position that may restrict
movement of personnel or that may fray due to movement of other equipment
near the system.
OmniAccess 740 Hardware User's Guide
Beta
OWER
Alcatel-Lucent
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Power Supply Overview
33
Beta