Alcatel-Lucent OMNIACCESS 740 Hardware User's Manual page 51

Step 3: Configure the system.
Once the system bootup is complete, the system enters the initial configuration
setup mode, which is an interactive mode for configuring the system. Follow the
prompts on the screen to input the required information.
For further customizing and changing the configuration, it would be necessary to
use the full-fledged CLI access to the system. To use the CLI and to know more
about its usage, refer to the "OmniAccess 700 CLI Configuration Guide".
Step 4: If all the activities have proceeded normally and if the initial configuration
is complete, the OA-740 is installed and is now ready for deployment in your
network.
OmniAccess 740 Hardware User's Guide
Beta
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
Alcatel-Lucent
Starting the OA-740
43
Beta