Installing Fillers - Alcatel-Lucent OMNIACCESS 740 Hardware User's Manual

Left running head:
Chapter name (automatic)
Installing the OmniAccess 740
Figure 14: Installing Line Card
R
EMOVING THE
To remove the line card, loosen the thumb screws provided on the line card and
pull the line card out of the slot.
I F
NSTALLING ILLERS
Fillers are used to cover unused slots. The procedure to install different types of
fillers is outlined below.
Step 1: Insert the filler in the empty slot.
Step 2: Verify that the filler is rested on the guide and rides smoothly in the slot.
Step 3: Push the filler firmly and ensure that the filler is fully inserted in its
respective slot and tighten the screws.
R F
EMOVING
To remove the filler for the line card slots, loosen the thumb screws provided on
the line card and pull the filler out of the slot.
40
Beta
6 E - 8
O A 7 -
- 4
T 1 E 1
O A 7 -
L C
INE ARDS
ILLERS
Alcatel-Lucent
S E
O A 7 -
OmniAccess 740 Hardware User's Guide
Beta