TYAN THUNDERBOLT Manual page 31

Installing SECC2 CPUs - Option 2
Another method to secure an
SECC2 CPU is by using the
Universal Retention Module (also
provided by Tyan). The universal
retention module is designed to
accommodate most versions of
the Pentium II / III CPUs. In-
cluded in this solution is an
overhead clip to lock the CPU into
its slot along with the side
universal braces. See Figure 2-18
(right) for the universal retention
module components.
Figure 2-19
Next, carefully insert the
CPU between the braces
and onto the CPU slot
(see Figure 2-20). Make
sure the CPU fan faces
towards the center of the
motherboard.
S1837 Thunderbolt
Top Clip
Figure 2-20
31
Side Braces
Figure 2-18
To install the CPU, place the
two side braces at the ends
of the CPU slot (see Figure 2-
19 left). The screws on the
motherboard should fit
through the holes of the
retention braces. Tighten
and secure both braces using
a screw driver.