Table of Contents
Advertisement
95
Power off the system and insert the Netscalibur into an
1.
empty 16-bit ISA slot and remove other modem cards from
the system. Afterwards, power on the system and boot to
Windows 95.
You must install the ISDN accelerator pack v1.1 or above
2.
before installing Netscalibur's ISDN driver. Therefore,
before you install the Microsoft ISDN Accelerator Pack
from the Netscalibur Wizard CD, choose "Do not install a
driver (Windows will not prompt you again)" when
Windows 95 detects the Netscalibur or choose "Cancel" if
you have Windows 95 OEM services release 2 .
If you accidentally select "Disk provided by
manufacturer." then you should do an uninstall as
described in page 6 before continuing with the setup in
step 12.
3. Perform a Scandisk operation before installing the drivers.
The setup program needs to modify the registry data and
copy files to your hard disk. Scanning the hard disk for
corrupted files will enable the setup program to copy drivers
correctly to the hard disk. The ScanDisk program is located
in Start -> Programs -> Accessories -> System Tools.
8
Advertisement
Table of Contents
