Table of Contents
Advertisement
8
If you do not have a network card installed in the system, then
you need to do this extra step. After configuring the Remote
Access Services, click OK to save the network settings and to
close the network window. Do not restart the system at this
point. Instead, re-open the Network applet and select Yes
when Windows NT prompts you to install a network card.
Afterwards, select Do_Not_Detect and then click on the
Remote button to install additional networking components.
You must have at least the following networking components
installed in the system:
Computer Browser
Remote Access Services
RPC Configuration
Server
TCP/IP Protocol
Workstation
You can double click on the
select SETUP to install Microsoft Internet Explorer 3.0 for
Windows NT 3.51. After installing Internet Explorer, you may
need to run it once before running the Netscalibur's browser
manual.
Notice that the setup options are different from Windows 95.
There is no uninstall for Windows NT and the setup has fewer
options. Also, please refer to the Windows NT manual on how to
use remote access.
20
Netscalibur icon and then
Advertisement
Table of Contents
