TYAN NETSCALIBUR Manual page 19

Please do not enter a space at the beginning of the SPID
and phone numbers. Also, do not enter a "-" or "," between
the numbers.
5
Pick ISDN1-Netscalibur and click OK. Then click on the Add
button to add the second B channel.
6
Select ISDN2-Netscalibur and click OK. Then click on
Network to configure the dial out protocol. Add the TCP/IP
protocol for the internet access.
If you do not have a network card installed in the system,
7
please continue the setup in step 8. Otherwise, click on OK to
close the network settings window and restart the system.
space
19