Table of Contents
Advertisement
6
Click Next to continue installing. From time to time, Windows
NT will prompt you for the location of the Windows NT CD.
Please type in the correct NT CD location.
7
In this step, you have to select an available IRQ, address, and
switch type. Since Windows NT does not support plug and play,
you have to make sure that your selections will not cause any
conflicts.
8
Finally, select Multi-Point and enter the SPID number of the
first and second B channels with a space between the SPIDs.
Then select 64000 bps and type in the phone number of the
first and second B channels with a space between the two phone
numbers.
Please do not enter a space at the beginning of the SPID
and phone numbers. Also, do not enter a "-" or "," between
the numbers.
space
15
Advertisement
Table of Contents
