Table of Contents
Advertisement
7.
After adding the Dial-Up Adapter, keep the Client for
Microsoft Networks or Client for Netware Networks if
you want to enable password saving in the Dial-up
Networking. Next, type in a name for the workgroup in the
Identification folder. Click on OK to continue. At this time,
Windows 95 will prompt you for the Windows 95 CD. Place
the original Windows 95 source CD in the CD-ROM drive.
Afterwards, restart the system. Windows 95 will detect new
hardware. Put the Netscalibur CD into the CD-ROM drive.
Select "Disk Provided by hardware manufacturer" and
click on the Browse button to locate your CD-ROM drive
and then find the ISDN driver under the \driver\isdn
directory on the Netscalibur CD and click OK to continue.
Then enter the switch type, ISDN phone numbers, and
SPID numbers of your ISDN line. This information should
be given by the phone company. The easiest place to find
this information is on your phone bill. You can enter any 7
digits for the ISDN phone number and any 10 digits for the
SPID if you do not have a ISDN line yet.
Please do not enter a space, ",", or "-" between numbers
If you still have questions regarding how to use the Dial-up
Network feature to access the Internet, please refer to
browser manual for the video clip, FAQ, or
N et scal i bur' s
your Windows 95 manual.
11
Advertisement
Table of Contents
