Table of Contents
Advertisement
Quick Links
Operating Manual
BD-S / BD-S-UL (E1)
ED-S / ED-S-UL (E1)
FD-S / FD-S-UL (E1)
with R-S microprocessor temperature controller
Model
Model version
BD-S 56
BDS056-230V
BD-S-UL 56
BDS056UL-120V
BD-S 115
BDS115-230V
BD-S-UL 115
BDS115UL-120V
ED-S 56
EDS056-230V
ED-S-UL 56
EDS056UL-120V
ED-S 115
EDS115-230V
ED-S-UL 115
EDS115UL-120V
FD-S 56
FDS056-230V
FD-S-UL 56
FDS056UL-120V
FD-S 115
FDS115-230V
FD-S-UL 115
FDS115UL-120V
BINDER GmbH
Address: Post office box 102, 78502 Tuttlingen, Germany Phone: +49 7462 2005 0
Fax: +49 7462 2005 100 Internet: http://www.binder-world.com
E-mail: info@binder-world.com Service Hotline: +49 7462 2005 555
Service Fax: +49 7462 2005 93 555 Service E-Mail: service@binder-world.com
Service Hotline USA: +1 866 885 9794 or +1 631 224 4340 x3
Service Hotline Asia Pacific: +852 390 705 04 or +852 390 705 03
Service Hotline Russia and CIS: +7 495 988 15 16
Issue 05/2019
Incubators with natural convection
Drying and heating ovens with natural
convection
Drying and heating ovens with forced
convection
Art. No.
9090-0016, 9190-0016
9090-0017, 9190-0017
9090-0022, 9190-0022
9090-0023, 9190-0023
9090-0014, 9190-0014
9090-0015, 9190-0015
9090-0020, 9190-0020
9090-0021, 9190-0021
9090-0018, 9190-0018
9090-0019, 9190-0019
9090-0024, 9190-0024
9090-0025, 9190-0025
Art. No. 7001-0359
Advertisement
Table of Contents
Related Manuals for Binder ED-S 115
Summarization of Contents
Safety
Legal Considerations
Legal disclaimers and information regarding the manual's use.
Structure of Safety Instructions
Explains safety symbols, signal words, and pictograms used in the manual.
Localization / Position of Safety Labels on the Chamber
Identifies the placement of safety labels on the chamber unit.
Type Plate
Details the information found on the chamber's identification plate.
General Safety Instructions on Installing and Operating the Chambers
Provides crucial safety guidelines for installation and operation.
Intended Use
Defines the approved applications and limitations for the chamber.
Chamber Description
Chamber Overview
Visual guide to the chamber's main parts and external features.
Triangular Instrument Panel
Description of the R-S controller display and buttons.
Completeness of Delivery, Transportation, Storage, and Installation
Unpacking, and Checking Equipment and Completeness of Delivery
Instructions for unpacking and verifying the delivered chamber and accessories.
Guidelines for Safe Lifting and Transportation
Procedures for safely moving and transporting the chamber.
Storage
Recommendations for storing the chamber when not in use.
Location of Installation and Ambient Conditions
Specifies requirements for the chamber's installation site and environment.
Installation
Installing the Racks
Instructions for inserting the racks into the chamber.
Connection to an Exhaust/Ventilation System (Optional)
Guidance on connecting the chamber to an external ventilation system.
Electrical Connection
Details on connecting the chamber to the power supply.
R-S Controller Overview
Menu Structure Overview
Overview of the controller's menu navigation and options.
Start Up
Adjusting Air Change
How to adjust the chamber's internal air circulation.
Selecting the Temperature Unit
Setting the Temperature Unit
Procedure to set the chamber's temperature display unit (Celsius/Fahrenheit).
Overtemperature Protection
Overtemperature Protective Device (Class 1)
Details on the primary overtemperature safety device and its function.
Safety Controller
Explanation of the adjustable electronic safety controller and its classes.
Timer Function "Delayed Off"
Setting the Timer Run-Time
Procedure for programming the timer's delay duration.
Ramp Function
Setting the Ramp
Steps to define the start point and equilibration for a temperature ramp.
Setting the Gradient
How to set the rate of temperature change for a ramp.
Display of the Ramp Course
Information on how the ramp progress is displayed.
Turning Off the Ramp Function
Method to deactivate the ramp function.
Options
Data Logger Kits (Option)
Details on the optional data logger kits for temperature monitoring.
Maintenance, Cleaning, and Service
Maintenance Intervals, Service
Recommended schedule and procedures for maintenance and service.
Cleaning and Decontamination
Instructions for cleaning and decontaminating the chamber.
Sending the Chamber Back to BINDER GmbH
Process for returning the chamber for repair or other reasons.
Disposal
Disposal of the Transport Packing
Information on how to dispose of packaging materials.
Decommissioning
Steps for preparing the chamber for final disposal.
Disposal of the Chamber in the Federal Republic of Germany
Specific disposal regulations for Germany.
Disposal of the Chamber in the Member States of the EU Except for the Federal Republic of Germany
Disposal rules for EU member states outside Germany.
Disposal of the Chamber in Non-Member States of the EU
Disposal guidelines for countries outside the EU.
Technical Description
Factory Calibration and Adjustment
Information about the initial factory calibration process.
Definition of Usable Volume
Explanation of how the usable internal volume is calculated.
Over Current Protection
Details on fuses used for over-current protection.
Technical Data
Comprehensive table of technical specifications for different models.
Equipment and Options (Extract)
List of standard equipment and available optional accessories.
Accessories and Spare Parts (Extract)
List of common accessories and spare parts with article numbers.
Dimensioned Drawings
Technical drawings showing chamber dimensions.
BD-S / BD-S-UL 56 Dimensioned Drawings
Detailed dimensional drawings for the BD-S/BD-S-UL 56 models.
BD-S / BD-S-UL 115 Dimensioned Drawings
Detailed dimensional drawings for the BD-S/BD-S-UL 115 models.
ED-S / ED-S-UL 56 Dimensioned Drawings
Detailed dimensional drawings for the ED-S/ED-S-UL 56 models.
ED-S / ED-S-UL 115 Dimensioned Drawings
Detailed dimensional drawings for the ED-S/ED-S-UL 115 models.
FD-S / FD-S-UL 56 Dimensioned Drawings
Detailed dimensional drawings for the FD-S/FD-S-UL 56 models.
FD-S / FD-S-UL 115 Dimensioned Drawings
Detailed dimensional drawings for the FD-S/FD-S-UL 115 models.
Certificates and Declarations of Conformity
EU Declaration of Conformity for BD-S
EU conformity declaration for BD-S series incubators.
EU Declaration of Conformity for ED-S
EU conformity declaration for ED-S series ovens.
EU Declaration of Conformity for FD-S
EU conformity declaration for FD-S series ovens.
Certificate for the GS Mark of Conformity
VDE certificate for the GS mark of product safety.
Certificate of UL Compliance
UL compliance certificate for laboratory ovens.
Contamination Clearance Certificate
For Chambers Located Outside the USA and Canada
Contamination declaration form for non-USA/Canada returns.
For Chambers Located in the USA and Canada
Product return authorization and decontamination form for USA/Canada.
Need help?
Do you have a question about the ED-S 115 and is the answer not in the manual?
Questions and answers