Table of Contents
Advertisement
Quick Links
Operating Manual
BD-S / BD-S-UL (E1)
ED-S / ED-S-UL (E1)
FD-S / FD-S-UL (E1)
with R-S microprocessor temperature controller
Model
Model version
BD-S 56
BDS056-230V
BD-S-UL 56
BDS056UL-120V
BD-S 115
BDS115-230V
BD-S-UL 115
BDS115UL-120V
ED-S 56
EDS056-230V
ED-S-UL 56
EDS056UL-120V
ED-S 115
EDS115-230V
ED-S-UL 115
EDS115UL-120V
FD-S 56
FDS056-230V
FD-S-UL 56
FDS056UL-120V
FD-S 115
FDS115-230V
FD-S-UL 115
FDS115UL-120V
BINDER GmbH
Address: Post office box 102, 78502 Tuttlingen, Germany Phone: +49 7462 2005 0
Fax: +49 7462 2005 100 Internet: http://www.binder-world.com
E-mail: info@binder-world.com Service Hotline: +49 7462 2005 555
Service Fax: +49 7462 2005 93 555 Service E-Mail: service@binder-world.com
Service Hotline USA: +1 866 885 9794 or +1 631 224 4340 x3
Service Hotline Asia Pacific: +852 390 705 04 or +852 390 705 03
Service Hotline Russia and CIS: +7 495 988 15 16
Issue 05/2019
Incubators with natural convection
Drying and heating ovens with natural
convection
Drying and heating ovens with forced
convection
Art. No.
9090-0016, 9190-0016
9090-0017, 9190-0017
9090-0022, 9190-0022
9090-0023, 9190-0023
9090-0014, 9190-0014
9090-0015, 9190-0015
9090-0020, 9190-0020
9090-0021, 9190-0021
9090-0018, 9190-0018
9090-0019, 9190-0019
9090-0024, 9190-0024
9090-0025, 9190-0025
Art. No. 7001-0359
Advertisement
Table of Contents
Related Manuals for Binder ED-S 56
Summarization of Contents
Safety
Legal considerations
Information for installation, start-up, operation, and maintenance of the product.
Structure of the safety instructions
Explains safety definitions, symbols, signal word panels, and pictograms.
Localization / position of safety labels on the chamber
Details the location of various safety labels on the chamber exterior.
Type plate
Describes the information found on the chamber's identification type plate.
General safety instructions on installing and operating the chambers
Provides essential safety guidelines for chamber installation and operation.
Intended use
Defines the approved applications and limitations for the chambers.
Chamber description
Chamber overview
Overview of chamber components and their locations with diagrams.
Triangular instrument panel
Details the R-S controller panel, display, and buttons.
Completeness of delivery, transportation, storage, and installation
Unpacking, and checking equipment and completeness of delivery
Procedure for unpacking and verifying chamber and accessory completeness.
Guidelines for safe lifting and transportation
Instructions for safely handling, lifting, and transporting the chamber.
Storage
Guidelines for proper intermediate storage of the chamber.
Location of installation and ambient conditions
Specifies requirements for the installation site and ambient environment.
Installation
Installing the racks
Instructions on how to install rack supports and racks.
Connection to an exhaust/ventilation system (optional)
Guidance on connecting the chamber to external ventilation systems.
Electrical connection
Details electrical connection requirements and specifications for the chamber.
R-S controller overview
Menu structure overview
Explains the controller's menu structure, quick access, and password-protected menus.
Start up
Adjusting air change
How to adjust the chamber's air change rate using the exhaust air flap.
Selecting the temperature unit
Setting the temperature unit
Instructions on how to switch between Celsius and Fahrenheit units.
Overtemperature protection
Overtemperature protective device (class 1)
Describes the primary safety device that permanently turns off the unit.
Safety controller
Details the adjustable electronic safety controller, its setting, and alarm handling.
Timer function "Delayed Off"
Setting the timer run-time
Procedure for setting the delay time for automatic shut-off.
Ramp function
Setting the ramp
Instructions for programming temperature ramps and setting the target temperature.
Setting the gradient
Details on how to set the temperature rise rate for ramp functions.
Display of the ramp course
Explains how the ramp progress is displayed on the controller.
Turning off the ramp function
How to deactivate the ramp function and return to normal heating.
Options
Data logger kits (option)
Information about optional data logger kits for temperature monitoring.
Maintenance, cleaning, and service
Maintenance intervals, service
Recommended maintenance schedules and service procedures.
Cleaning and decontamination
Guidelines for cleaning and decontaminating the chamber safely.
Sending the chamber back to BINDER GmbH
Procedure for returning a chamber for repair or service to the manufacturer.
Disposal
Disposal of the transport packing
Instructions for the proper disposal and recycling of packing materials.
Decommissioning
Steps for safely decommissioning the chamber before disposal or storage.
Disposal of the chamber in the Federal Republic of Germany
Specific regulations for disposing of the chamber in Germany according to WEEE.
Disposal of the chamber in the member states of the EU except for the Federal Republic of Germany
Disposal guidelines for EU member states outside of Germany.
Disposal of the chamber in non-member states of the EU
Procedures for disposing of the chamber in countries outside the EU.
Technical description
Factory calibration and adjustment
Details on factory calibration procedures and quality standards.
Definition of usable volume
Explains how the usable internal volume of the chamber is calculated.
Over current protection
Information on the fuses protecting the chamber from overcurrent.
Technical data
Provides detailed specifications and performance data for the chambers.
Equipment and options (extract)
Lists standard equipment and optional accessories available for the chambers.
Accessories and spare parts (extract)
Information on ordering spare parts and accessories from BINDER.
Dimensioned drawings
Includes detailed technical drawings with dimensions for various chamber models.
Certificates and declarations of conformity
EU Declaration of Conformity for BD-S
Official EU declaration of conformity for the BD-S series chambers.
EU Declaration of Conformity for ED-S
Official EU declaration of conformity for the ED-S series chambers.
EU Declaration of Conformity for FD-S
Official EU declaration of conformity for the FD-S series chambers.
Certificate for the GS mark of conformity of the “VDE Prüf- und Zertifizierungsinstitut”
Certificate for the GS mark of conformity issued by VDE.
Certificate of UL Compliance from Underwriters Laboratories Inc.®
Certificate confirming UL compliance for specific chamber models.
Contamination clearance certificate
For chambers located outside the USA and Canada
Form for declaring the contamination status of chambers outside USA/Canada.
For chambers located in the USA and Canada
Product return authorization request form for USA and Canada.
Need help?
Do you have a question about the ED-S 56 and is the answer not in the manual?
Questions and answers