Advertisement
SYNC REC SELECT
Specifies the Sync Rec Mode setting of the controlled device.
A return command is returned only if Sense [FF] is specified.
The Sync Rec Level is specified by the command "SYNC REC LEVEL PRESET [28]."
Command
38
Machine ID
0
Data
2 bytes
Data 1
Data 2
0
0
0
1
F
F
・ If data other than the above is received, the CD-RW901 will transmit ILLEGAL [F2].
Return
SYNC REC SELECT RETURN [B8]
INCR PLAY SELECT
Specifies the Incremental Play Mode of the controlled device.
A return command is returned only if Sense [FF] is specified.
Command
3A
Machine ID
0
Data
2 bytes
Data 1
Data 2
0
0
0
1
F
F
・ If data other than the above is received, the CD-RW901 will transmit ILLEGAL [F2].
Return
INCR PLAY SELECT RETURN [BA]
KEY CONTROL SELECT
Specifies the Key Control Mode of the controlled device.
A return command is returned only if Sense [FF] is specified.
The key control value is set by the command "KEY CONTROL DATA PRESET [2D]."
Command
3D
Machine ID
0
Data
2 bytes
Data 1
Data 2
0
0
0
1
F
F
・ If data other than the above is received, the CD-RW901 will transmit ILLEGAL [F2].
Return
KEY CONTROL SELECT RETURN [BD]
Description
Remarks
Sync Rec Off
Sync Rec On
Sense
Requests that the preset content be returned.
Description
Remarks
INCR Play Off
INCR Play On
Sense
Requests that the preset content be returned.
Description
Remarks
Key
Control
Off
Key
Control
On
Sense
Requests that the preset content be returned.
TASCAM MD-CD1 RS-232C Protocol Specification
21
TEAC Corporation
Advertisement
