Advertisement
TIME SEARCH PRESET
Searches for the specified track number and time.
If this command is received while in STOP mode or PLAY mode, the device will enter PLAY mode
following the search. If the device was in any other mode, it will remain in that mode following the
search.
Command
2C
Machine ID
0
Data
12 bytes
Data 1
Data 2
Data 3
Data 4
Data 5
Data 6
Data 7
Data 8
Data 9
Data 10
Data 11
Data 12
・ If a track number not existing on the disc is specified, the CD-RW901 will transmit ILLEGAL
[F2].
・ If data outside the operating range is received, the CD-RW901 will transmit ILLEGAL [F2].
Return
none
KEY CONTROL DATA PRESET
Specifies the playback key of controlled device.
A range of ±6 semitones can be specified.
A return command is returned only if Sense [FF] is specified.
The KEY CONTROL MODE setting is made using the command "KEY CONTROL SELECT [3D]."
Command
2D
Machine ID
0
Data
2 bytes
Data 1
Data 2
0
1
0 – 6
F
F
・ If data outside the operating range is received, the CD-RW901 will transmit ILLEGAL [F2].
Return
KEY CONTROL DATA RETURN [AD]
Description
Remarks
Tens digit of track
number
Ones digit of track
number
Thousands digit of
track number
Hundreds digit of
track number
Tens
digit
of
minutes
Ones
digit
of
minutes
Hundreds digit of
minutes
Thousands digit of
minutes
Tens
digit
of
seconds
Ones
digit
of
seconds
0
Set to 0
0
Set to 0
Description
Remarks
Key Up
Key Down
Key Change
Semitone units
Sense
Requests that the preset content be returned.
TASCAM MD-CD1 RS-232C Protocol Specification
15
TEAC Corporation
Advertisement
