Teac CD-RW901SL Specification page 11

SHUTTLE
Puts the controlled device in SHUTTLE mode.
SHUTTLE mode will be maintained until a command such as STOP, PLAY, or READY is received.
Command 16
Machine ID 0
Data 2 bytes
Data 1 Data 2
0 0
0 1
・ If data other than the above is received, the CD-RW901 will transmit ILLEGAL [F2].
Return none
TRAY
Opens or closes the tray of the controlled device.
Command 18
Machine ID 0
Data none
Return none
SKIP
Causes the controlled device to skip tracks.
After skipping, the device will maintain the mode in which it was when the operation began.
Command 1A
Machine ID 0
Data 2 bytes
Data 1 Data 2
0 0
0 1
1 0
1 1
・ If data other than the above is received, the CD-RW901 will transmit ILLEGAL [F2].
Return none
CALL
Causes the controlled device to locate to the call point and enter playback-ready mode.
Command 1D
Machine ID 0
Data none
Return none
Description Remarks
Shuttle Shuttles in the forward direction.
Forward
Shuttle Shuttles in the backward direction.
Reverse
Description Remarks
Track Skip Next Skips to the next track.
Track Skip If the current position is at the beginning of a track,
Previous skips to the beginning of the previous track. If the
current position is not at the beginning of a track, skips
to the beginning of the current track..
Index Skip Next Skips to the next index.
Index Skip If the current position is index 2 or higher, skips to the
Previous beginning of the previous index.
TASCAM MD-CD1 RS-232C Protocol Specification
10 TEAC Corporation