Teac CD-RW901SL Specification page 21

PITCH CONTROL SELECT
Specifies the Pitch Control mode of the controlled device.
A return command is returned only if Sens [FF] is specified.
The pitch control value is specified by the command "PITCH CONTROL DATA PRESET [25]."
Command 35
Machine ID 0
Data 2 bytes
Data 1 Data 2
0 0
0 1
F F
・ If data other than the above is received, the CD-RW901 will transmit ILLEGAL [F2].
Return PITCH CONTROL SELECT RETURN [B5]
AUTO READY SELECT
Specifies the Auto Ready mode setting of the controlled device.
A return command is returned only if Sense [FF] is specified.
Command 36
Machine ID 0
Data 2 bytes
Data 1 Data 2
0 0
0 1
F F
・ If data other than the above is received, the CD-RW901 will transmit ILLEGAL [F2].
Return AUTO READY SELECT RETURN [B6]
REPEAT SELECT
Specifies the Repeat Mode setting of the controlled device.
A return command is returned only if Sense [FF] is specified.
Command 37
Machine ID 0
Data 2 bytes
Data 1 Data 2
0 0
0 1
F F
・ If data other than the above is received, the CD-RW901 will transmit ILLEGAL [F2].
Return REPEAT SELECT RETURN [B7]
Description Remarks
Pitch Control Off
Pitch Control On
Sense Requests that the preset content be returned.
Description Remarks
Auto Ready
Off
Auto Ready
On
Sense Requests that the preset content be returned.
Description Remarks
Repeat Off
Repeat On
Sense Requests that the preset content be returned.
TASCAM MD-CD1 RS-232C Protocol Specification
20 TEAC Corporation