Controls And Features (Input Card: Optional) - JVC DT-V1700CG - High-definition Dtv Monitor Instructions Manual

CONTROLS AND FEATURES
(INPUT CARD: OPTIONAL)
COMPONENT/RGB INPUT CARD (OPTIONAL:
IF-C01COMG)
G/Y
IN OUT
B/P /B-Y
B
1
IN OUT
R/P /B-Y
R
IN OUT
HD/C
S
2
IN OUT
VD
IN IN OUT OUT
AUDIO
3
IN OUT
Compatible signal formats:
480/60i, 576/50i, 480/50p, 480/60p, 720/60p, 1035/60i,
1080/50i, 1080/60i
VIDEO INPUT CARD (OPTIONAL: IF-C01PNG)
VIDEO 1
1
IN OUT
VIDEO 2
IN OUT
2
Y/C IN
EXT.SYNC
3
IN OUT
AUDIO 1
4
OUT
IN
AUDIO 2
Compatible signal formats:
NTSC, PAL, black-and-white (50 Hz/60 Hz)
* You can select "AUTO" (automatic selection), "NTSC" or
"PAL" in SETUP MENU when switching NTSC or PAL.
Normally select AUTO. However, if the input signal is
unstable, select NTSC or PAL.
6
Untitled-1 6
1 Video input/output terminals
Input (IN) and output (OUT) terminals for component
(color deference) or RGB signals.
The IN and OUT terminals are bridge-connected.
(When no cable is connected to the OUT terminal, the
input signal is automatically terminated.)
Select component signal : press INPUT SELECT A/C/E
Select RGB signal
4
2
Synchronized signal input/output terminals
Input (IN) and output (OUT) terminals for the vertical,
horizontal or complex synchronized signals.
The synchronized signals from these terminals have
priority over other terminals. When no synchronized signal
is input to these terminals, the synchronized signal from
the video input/output terminals (G/Y terminals) is valid.
The IN and OUT terminals are bridge-connected.
(When no cable is connected to the OUT terminal, the
input signal is automatically terminated.)
Audio input/output terminals
3
Input (IN) and output (OUT) terminals for audio signals.
The IN and OUT terminals are bridge-connected.
4
Connection terminal (to a Multi-Format Monitor)
Attach to the connection terminal of your multi-format
monitor.
1 Video input/output terminals
Input (IN) and output (OUT) terminals for video signals.
The IN and OUT terminals are bridge-connected.
(When no cable is connected to the OUT terminal, the
input signal is automatically terminated.)
Select VIDEO 1 : press INPUT SELECT A/C/E button
Select VIDEO 2 : press INPUT SELECT B/D/F button
2 S-video input terminal
Input terminal for the S-video signal.
When an S-video signal is input to this terminal and a
5
video signal is input to VIDEO 2, the S-video signal has
priority over the video signal.
When choosing the S-video input, press INPUT SELECT
B/D/F button.
3 Synchronized signal input/output terminals
Input (IN) and output (OUT) terminals for the complex
synchronized signals.
The synchronized signals from these terminals have priority
over signals from other terminals. When no synchronized
signal is input to these terminals, the synchronized signal
from the video input/output terminals is valid.
The IN and OUT terminals are bridge-connected.
(When no cable is connected to the OUT terminal, the
input signal is automatically terminated.)
4 Audio input/output terminals
Input (IN) and output (OUT) terminals for audio signals
corresponding to VIDEO 1 and VIDEO 2. The IN and
OUT terminals are bridge-connected.
5 Connection terminal (to a Multi-Format Monitor)
Attach to the connection terminal of your multi-format
monitor.
01.3.27, 9:58
button
: press INPUT SELECT B/D/F
button