JVC DT-V1700CG - High-definition Dtv Monitor Instructions Manual page 24

APPENDIX: CONNECTION EXAMPLES FOR
THE SDI INPUT CARD
This section explains the usage precautions and connection examples when using the SWITCHED OUT terminal of the SDI input
card.
Usage Precautions
● The selected signal is output from the SWITCHED OUT terminal only when the monitor's power is turned on.
● The output signal from the SWITCHED OUT terminal is the one that is selected from the signals input to SDI 1 or SDI 2.
The table below shows the connection between the INPUT SELECT buttons (input signal selection) and the input/output of
the SDI input card.
Selected INPUT SELECT Buttons
A, C, E
B, D, F
© 2001 VICTOR COMPANY OF JAPAN, LIMITED
24
Untitled-1
Signal Output from the SWITCHED OUT Terminal
Signal from SDI 1
Signal from SDI 2
JVC PROFESSIONAL PRODUCTS COMPANY
DIVISION OF US JVC CORP.
1700 Valley Road Wayne, N.J. 07470
JVC CANADA INC.
21 Finchdene Square, Scarborough Ontario M1X 1A7
24 01.3.27, 9:58
Printed in Japan
LCT0971-001A
0201-I-U-VP