Table of Contents
Advertisement
CONTROLS AND FEATURES
(INPUT CARD: OPTIONAL)
COMPONENT/RGB INPUT CARD (OPTIONAL:
IF-C01COMG)
G/Y
IN
OUT
B/P
/B-Y
B
1
IN
OUT
R/P
/B-Y
R
IN
OUT
HD/C
S
2
IN
OUT
VD
IN
IN
OUT
OUT
AUDIO
3
IN
OUT
Compatible signal formats:
480/60i, 576/50i, 480/50p, 480/60p, 720/60p, 1035/60i,
1080/50i, 1080/60i
VIDEO INPUT CARD (OPTIONAL: IF-C01PNG)
VIDEO 1
1
IN
OUT
VIDEO 2
IN
OUT
2
Y/C IN
EXT.SYNC
3
IN
OUT
AUDIO 1
4
IN
OUT
AUDIO 2
Compatible signal formats:
NTSC (3.58 MHz), PAL (4.43 MHz), black-and-white
(50 Hz/60 Hz)
* You can select "AUTO" (automatic selection), "NTSC" or
"PAL" in SETUP MENU when switching NTSC or PAL.
Normally select AUTO. However, if the input signal is
unstable, select NTSC or PAL.
6
1
Video input/output terminals
Input (IN) and output (OUT) terminals for component
(colour deference) or RGB signals.
The IN and OUT terminals are bridge-connected.
(When no cable is connected to the OUT terminal, the
input signal is automatically terminated.)
Select component signal : press INPUT SELECT A/C/E
Select RGB signal
4
2
Synchronised signal input/output terminals
Input (IN) and output (OUT) terminals for the vertical,
horizontal or complex synchronised signals.
The synchronised signals from these terminals have
priority over other terminals. When no synchronised signal
is input to these terminals, the synchronised signal from
the video input/output terminals (G/Y terminals) is valid.
The IN and OUT terminals are bridge-connected.
(When no cable is connected to the OUT terminal, the
input signal is automatically terminated.)
Audio input/output terminals
3
Input (IN) and output (OUT) terminals for audio signals.
The IN and OUT terminals are bridge-connected.
4
Connection terminal (to a Multi-Format Monitor)
Attach to the connection terminal of your multi-format
monitor.
1
Video input/output terminals
Input (IN) and output (OUT) terminals for video signals.
The IN and OUT terminals are bridge-connected.
(When no cable is connected to the OUT terminal, the
input signal is automatically terminated.)
Select VIDEO 1 : press INPUT SELECT A/C/E button
Select VIDEO 2 : press INPUT SELECT B/D/F button
2
S-video input terminal
Input terminal for the S-video signal.
When an S-video signal is input to this terminal and a
5
video signal is input to VIDEO 2, the S-video signal has
priority over the video signal.
When choosing the S-video input, press INPUT SELECT
B/D/F button.
3
Synchronised signal input/output terminals
Input (IN) and output (OUT) terminals for the complex
synchronised signals.
The synchronised signals from these terminals have priority
over signals from other terminals. When no synchronised
signal is input to these terminals, the synchronised signal
from the video input/output terminals is valid.
The IN and OUT terminals are bridge-connected.
(When no cable is connected to the OUT terminal, the
input signal is automatically terminated.)
4
Audio input/output terminals
Input (IN) and output (OUT) terminals for audio signals
corresponding to VIDEO 1 and VIDEO 2. The IN and
OUT terminals are bridge-connected.
5
Connection terminal (to a Multi-Format Monitor)
Attach to the connection terminal of your multi-format
monitor.
button
: press INPUT SELECT B/D/F
button
Advertisement
Table of Contents
