Related Manuals for klover CLASS HYDRA
Summarization of Contents
Service Declaration
Declared Performances
Technical performance features of the appliance as per harmonised specifications.
Introduction
Important Safety Instructions
Critical guidelines for safe installation, operation, and maintenance of the appliance.
The Machine and the Pellets
Appliance Components
Lists and describes the standard features and parts included with the pellet boiler stove.
Connections Data Sheet
Thermoaura Model Connections
Technical diagram and specifications for the rear view connections of the THERMOAURA model.
Thermoclass Model Connections
Technical diagram and specifications for the rear view connections of the THERMOCLASS model.
Installation Requirements
Positioning the Appliance
Key considerations for selecting the optimal location for installing the pellet boiler stove.
Installation Clearances
Minimum clearance distances required around the appliance for safe operation and maintenance.
External Air Intake
Mandatory requirements for providing adequate air intake for proper combustion and safety.
Flue and Chimney System
Flue Connection Specifications
Detailed specifications and requirements for the correct installation and connection of the flue system.
Additional Flue Specifications
Further important considerations for flue installation, including material and layout.
Chimney Requirements
Essential requirements for chimney design and function to ensure safe dispersion of combustion products.
Electrical Connection
Coupled Boiler Control
How to integrate the pellet appliance with an existing boiler for heating system management.
Display and Menu Navigation
Appliance Menu Structure
Overview of the appliance's display interface and navigation through its menu options.
Initial Start-Up
System Configuration
Procedures for configuring the appliance based on the specific heating system setup.
System Filling and Priming
Steps for filling and venting the heating system after appliance installation.
Pellet Loading and Power Connection
Instructions for connecting power and loading pellets for initial operation.
Ignition Cycle Explained
Detailed explanation of the process the appliance follows to start and achieve a stable flame.
Switch-off Cycle
Procedure for safely shutting down the appliance.
Adjusting Operating Power
How to modify the working power level of the appliance.
Temperature Settings
Instructions for changing water and puffer temperatures for the heating system.
Problems, Alarms, and Tips
Useful Information
General tips and important notes regarding the appliance's operation and characteristics.
Troubleshooting Common Issues
Guide for resolving common operational issues and understanding fault scenarios.
Alarm Signal Guide
Comprehensive list of display alarms, their origins, and potential causes for the appliance.
Cleaning and Maintenance
Cleaning Precautions
Safety measures and checks to perform before undertaking any cleaning or maintenance tasks.
Routine Cleaning
Step-by-step guide for regular cleaning procedures to ensure optimal performance.
Non-Routine Cleaning
Instructions for periodic, more in-depth cleaning of the appliance's internal components.
Annual Cleaning and Service
Procedures for comprehensive annual maintenance, often requiring professional assistance.
Ceramic Glass Cleaning
Procedure for cleaning the appliance's glass surface when it is cold.
Flue Cleaning Procedures
Guidelines for cleaning the flue system at least annually for optimal performance.
General Appliance Maintenance
Essential maintenance checks and procedures recommended for ensuring longevity and performance.
PCB Parameters
Parameters Table Overview
Detailed listing of configurable parameters, their functions, and default values for appliance settings.
Warranty Information
Standard Warranty Conditions
Details on the terms, duration, and conditions of the Klover product warranty.
Need help?
Do you have a question about the CLASS HYDRA and is the answer not in the manual?
Questions and answers