klover Diva 3000 Installation, Use, Maintenance And Helpful Tips
  1. Manuals
  2. Brands
  3. klover Manuals
  4. Stove
  5. Diva 3000
  6. Installation, use, maintenance and helpful tips

klover Diva 3000 Installation, Use, Maintenance And Helpful Tips

Pellet boiler stove
Hide thumbs
Table of Contents

Advertisement

Quick Links

DIVA 3000 pellet
ENGLISH
boiler stove
INSTALLATION, USE, MAINTENANCE
AND HELPFUL TIPS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Diva 3000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for klover Diva 3000

Summary of Contents for klover Diva 3000

  • Page 1 DIVA 3000 pellet ENGLISH boiler stove INSTALLATION, USE, MAINTENANCE AND HELPFUL TIPS...
  • Page 3 DV3000, DV3000-V, DV3000-P, DV3000-PV, Identification number DV3000W, DV3000W-V, DV3000W-P, DV3000-PV Diva 3000, Diva 3000-V, Diva 3000-P, Diva 3000- Model and/or lot no. and/or serial no. (Art. 11-4) PV, Diva 3000 Wood, Diva 3000 Wood-V, Diva 3000-P Wood, Diva 3000-PV Wood...

  • Page 4: Table Of Contents

    CONTENTS CONTENTS ..................................1 INTRODUCTION ................................. 3 ........................... 3 MPORTANT SAFETY INSTRUCTIONS THE MACHINE AND THE PELLETS ..........................4 ............................. 4 OMPONENTS OF THE APPLIANCE ..............................7 VERALL DIMENSIONS .............................. 8 ITTINGS TECHNICAL SHEET ............................. 9 ECHNICAL PECIFICATIONS ..............................10 ELLET PROPERTIES REQUIREMENTS OF THE PLACE OF INSTALLATION ....................
  • Page 5 EN - Rev. 1.2 Dear Customer, first of all we would like to thank you for choosing a “KLOVER” product and hope you will be satisfied with your recent purchase. Carefully read the manual and warranty certificate on the last page of this User Guide.

  • Page 6: Introduction

    They will be responsible for the definitive installation of the appliance and its proper operation. KLOVER S.r.l. shall not be held liable if these precautions are not observed. During the installation and use of the appliance, all local regulations – including those referring to national and European Standards –...

  • Page 7: The Machine And The Pellets

    This User Guide constitutes an integral part of the appliance. If the product is sold to another user, this manual must be passed on to the new owner. KLOVER S.R.L. DECLINES ALL LIABILITY IN CASE OF ACCIDENTS DUE TO FAILURE TO COMPLY WITH THE SPECIFICATIONS OF THIS MANUAL.
  • Page 8 DIVA 3000 PELLET BOILER STOVE EN - Rev. 1.2 FRONT VIEW CE label with technical data, serial Pellet loading door number and model Left-hand inspection Right-hand inspection compartment compartment Combustion chamber door Main ON/OFF switch Serial connector for connecting external devices (e.g.
  • Page 9 DIVA 3000 PELLET BOILER STOVE EN - Rev. 1.2 LEFT-HAND INSPECTION COMPARTMENT TOUCH display Pellet tank inspection hatch Pellet level sensor Overpressure valve REAR VIEW Heating system delivery pipe fitting with check valve Heating system return pipe fitting Domestic hot water outlet...

  • Page 10: Overall Dimensions

    DIVA 3000 PELLET BOILER STOVE EN - Rev. 1.2 Overall dimensions REAR VIEW...

  • Page 11: Fittings Technical Sheet

    DIVA 3000 PELLET BOILER STOVE EN - Rev. 1.2 Fittings technical sheet REAR VIEW Description of fittings M = System Delivery 3/4” F R = System Return 3/4” M X = Safety valve drain 1/2” F = Side fume outlet (see “Overall dimensions”...

  • Page 12: Technical Specifications

    DIVA 3000 PELLET BOILER STOVE EN - Rev. 1.2 Technical Specifications Heat input (nominal setting) kW (Kcal/h) 31.8 (27,350) Heat input (reduced setting) kW (Kcal/h) 12.7 (10,900) Nominal heat output kW (Kcal/h) 30.0 (25,800) Reduced heat output kW (Kcal/h) 12.1 (10,400)

  • Page 13: Pellet Properties

    DIVA 3000 PELLET BOILER STOVE EN - Rev. 1.2 Pellet properties The appliance has been tested with all types of pellets available on the market. The pellets must have the following properties: Diameter 6 mm. Maximum length 35 mm. Maximum humidity content 8 – 9 %.

  • Page 14: Spaces Around And Above The Appliance

    DIVA 3000 PELLET BOILER STOVE EN - Rev. 1.2 The unit must be installed on a floor with a suitable load capacity. If the existing building does not fulfil this requirement appropriate measures (e.g. load distribution plate) must be taken.

  • Page 15: The Flue And Connection To The Same

    DIVA 3000 PELLET BOILER STOVE EN - Rev. 1.2 If there are other heating or extraction devices inside the room, the air vents must guarantee a sufficient amount of air for properly operating all the devices. Only sealed appliances (e.g. C type gas appliances, according to the UNI 7129 Standard) or appliances that do not cause a lower pressure compared with the external environment can pre-exist or be installed in the place where the appliance is installed.
  • Page 16 DIVA 3000 PELLET BOILER STOVE EN - Rev. 1.2 FURTHER SPECIFICATIONS TO BE CONSIDERED The appliance works with the combustion chamber in negative pressure and the flue pipe under pressure; it is essential that the flue gas outlet is hermetically sealed.

  • Page 17: Chimney

    Do not pass electric cables in the immediate vicinity of the flue gas pipe, unless they are insulated with suitable materials. KLOVER S.r.l. declines all responsibility for injury to persons and animals or damage to objects due to failure to connect the appliance to earth or to comply with IEC specifications.

  • Page 18: Control Of A Possible Three-Way Motorized Valve For Dhw System Management

    DIVA 3000 PELLET BOILER STOVE EN - Rev. 1.2 The two wires fitted on the left-hand technical compartment of the appliance (blue and brown wires) will have an output voltage of 230 V when the pellet appliance pump is working, and no voltage when the pump stops.

  • Page 19: Hydraulic Connection

    DIVA 3000 PELLET BOILER STOVE EN - Rev. 1.2 HYDRAULIC CONNECTION The plumbing connections must be made in a rational way using the connections on the template of the appliance. To facilitate connection of the pipes, all the hydraulic fittings have been positioned on the rear part of the appliance and can be accessed from the right-hand side door.

  • Page 20: The Display

    DIVA 3000 PELLET BOILER STOVE EN - Rev. 1.2 THE DISPLAY The appliance’s operating status is displayed on the console. After turning on the menu, it is possible to choose from many types of display and available settings according to the selected menu.
  • Page 21 DIVA 3000 PELLET BOILER STOVE EN - Rev. 1.2 The table explains how the buttons on the display work. REFERENCE DESCRIPTION OF KEY MODE OPERATION Programming mode. Changes/increases the value of the selected menu item. Increase temperature (1) Working/off. It increases the temperature of the room/water thermostat.
  • Page 22 DIVA 3000 PELLET BOILER STOVE EN - Rev. 1.2 The table described the meaning of the LEDs present on the display. REFERENCE DESCRIPTION OF LEDS OPERATION Room thermostat Lights up when the room thermostat contact input is open (satisfied). Timer programme Lights up when at least one timer programme is active.

  • Page 23: The Menu

    DIVA 3000 PELLET BOILER STOVE EN - Rev. 1.2 THE MENU Access the Menu by pressing key 3 (Set). The menu is divided into different items and levels, providing access to the programming and settings options of the appliance. Buttons 5 and 6 allow you to select the menus to be modified.
  • Page 24 DIVA 3000 PELLET BOILER STOVE EN - Rev. 1.2 PROGRAMME 1 MENU LEVEL SELECTION MEANING POSSIBLE VALUES START PROG 1 Turn-on time of the first programme Time – OFF M03-3-02 STOP PROG 1 Turn-off time of the first programme Time – OFF...
  • Page 25 The menu is reserved for expert users only; access by non-expert users can cause serious damage to the appliance, objects and the environment, as well as personal injuries. Klover declines all responsibility deriving from improper calibration of these values.
  • Page 26 By reducing the value by a single unit, the pellet load is reduced by about 2%. * Unauthorised access can cause serious damage to equipment, objects and the environment, as well as personal injuries. Klover declines all responsibility deriving from improper calibration of these values. Menu M11 – CLEANING MANAGEMENT Allows for calibrating the operation of the automatic cleaner of the smoke chamber.

  • Page 27: Initial Start-Up

    DIVA 3000 PELLET BOILER STOVE EN - Rev. 1.2 INITIAL START-UP System configuration Before commissioning the appliance it is advisable to choose which type of system it has been connected to, by accessing menu “M09 – PLANT TYPE”. The available PLANT TYPE configurations are given below: ➢...
  • Page 28 DIVA 3000 PELLET BOILER STOVE EN - Rev. 1.2 Plant type “2” involves connecting the boiler stove with integrated instant DHW (configured models only) to a heating system managed by one or more room thermostats. These are connected to the terminal fitted inside the appliance’s technical compartment.

  • Page 29: Initial Filling Of The System

    DIVA 3000 PELLET BOILER STOVE EN - Rev. 1.2 involve any connection of room thermostats or three-way valves to the appliance. These devices will thus have to be managed separately as required. Initial filling of the system After connecting the appliance hydraulically, fill the system as follows: Check the tightness of all pipes, the expansion vessel and the circulator pump;...

  • Page 30: Switch-Off Cycle

    DIVA 3000 PELLET BOILER STOVE EN - Rev. 1.2 Summary: The ignition cycle can last 20/25 minutes max. and is divided into five steps: Step 1 - START = Ignition of the flue gas extractor. Step 2 - WAITING PREHEATING = Waiting for the plug preheating. (Not as standard settings).

  • Page 31: Changing The Air Fan Speed

    DIVA 3000 PELLET BOILER STOVE EN - Rev. 1.2 DHW STORAGE CYLINDER TEMPERATURE For plant type 3, to modify the storage cylinder temperature, simply select “SET BOILER” by pressing button 1. Then press buttons 1 and 2. During this operation, the display will appear as shown in the figure below.

  • Page 32: Problems, Alarms, Useful Tips

    DIVA 3000 PELLET BOILER STOVE EN - Rev. 1.2 PROBLEMS, ALARMS, USEFUL TIPS Useful info… Listed below is some important information regarding the appliance: It is normal for the appliance to emit a smell of paint during its first few days of operation. We recommend properly ventilating the installation room during the initial start-up.

  • Page 33: Alarm Signals

    DIVA 3000 PELLET BOILER STOVE EN - Rev. 1.2 Previous state Blackout duration State after power is restored START duration < Pr48 START START duration > Pr48 START P-LOAD PELLET BLACKOUT ALARM WAITING FOR FLAME BLACKOUT ALARM FIRE ON duration < Pr48...

  • Page 34: Cleaning And Maintenance

    DIVA 3000 PELLET BOILER STOVE EN - Rev. 1.2 CLEANING AND MAINTENANCE Precautions before cleaning Before carrying out any cleaning or maintenance operations, make sure that: the appliance is off and has cooled down completely; the ash is completely cold.

  • Page 35: Non-Routine Cleaning

    DIVA 3000 PELLET BOILER STOVE EN - Rev. 1.2 Thoroughly clean the brazier from combustion residues by taking it out of its housing and removing any residues inside it (Figures 2 and 3). Use a suitable ash vacuum device to remove any ash deposited under the brazier...

  • Page 36: Annual Cleaning

    DIVA 3000 PELLET BOILER STOVE EN - Rev. 1.2 To ensure correct operation, it is necessary to remove the sawdust deposited on the bottom of the tank (Figure 9) least once every 30 days. The pellet tank must be emptied at the end of every season.
  • Page 37 DIVA 3000 PELLET BOILER STOVE EN - Rev. 1.2 Remove the upper frame by loosening the 4 screws (Figures 11 and 12). Remove the cover of the combustion chamber by loosening in sequence the 4 hexagonal screws (Figures 13 and 14).
  • Page 38 DIVA 3000 PELLET BOILER STOVE EN - Rev. 1.2 Remove the cover of the combustion chamber by loosening in sequence the 5 hexagonal screws (Figures 16 and 17). Remove the support plate by loosening the two screws, then remove the upper vermiculite brick (Figures 18 and 19).

  • Page 39: Cleaning The Ceramic Glass

    You must periodically check the seals because the latter guarantee the air- and water-tightness of the appliance and its good functioning; if they are worn or damaged you need to replace them immediately by contacting a Klover Authorised technical assistance centre.

  • Page 40: Pcb Parameters

    The following parameters are already stored when the appliance is tested directly in the factory; these parameters are the result of special tests using several types of pellets and must not be changed without prior authorisation from Klover S.r.l., so as to avoid jeopardising the appliance’s operation.
  • Page 41 DIVA 3000 PELLET BOILER STOVE EN - Rev. 1.2 Parameters “DEFAULT CALIBRATIONS” - Mod. DV3000 (N08_240821) Database Parameter Menu level Description Display Measurement Value field Pr01 M08 – 5 – 01 Ignition cycle maximum time IGNIT- MINUTES Minutes 5 – 25 Pr02 M08 –...

  • Page 42: Wiring Diagram

    DIVA 3000 PELLET BOILER STOVE EN - Rev. 1.2 WIRING DIAGRAM EXPANSION BOARD Q055 SCHEDA ESPANSIONE Q055 (OPTIONAL) (OPZIONALE) LEGENDA COMPONENTI: KEY TO COMPONENTS: M1 = Motoriduttore coclea screw feeder gearmotor M2 = Motoriduttore pulizia turbolatori (solo * PER IL COLLEGAMENTO ELETTRICO ALLA...

  • Page 43: Standard Warranty Conditions

    The Klover Warranty will remain in effect for a period of 2 years from the date of purchase, if proven by a delivery note or other proof of purchase (e.g. receipt), stating the name of the seller, the product that was bought, and the date of purchase.
  • Page 44 Klover Products must undergo functional testing before any related masonry works are carried out (for example before tiling, installation of pilasters, or painting of the walls). Klover S.r.l. shall not be held liable for any costs incurred as a result of removal and/or reconstruction of related installations, or for any other ancillary intervention even if it is the result of works to replace defective parts.
  • Page 45 DIVA 3000 PELLET BOILER STOVE EN - Rev. 1.2...
  • Page 46 DIVA 3000 PELLET BOILER STOVE EN - Rev. 1.2...
  • Page 47 DIVA 3000 PELLET BOILER STOVE EN - Rev. 1.2...
  • Page 48 Code CS.IST.DV3000-IT KLOVER S.r.l. Via A. Volta, 8 37047 San Bonifacio (VR), Italy VAT Reg. No. 02324280235 www.klover.it...

This manual is also suitable for:

Diva 3000-vDiva 3000-pDiva 3000-pvDiva 3000 woodDiva 3000 wood-vDiva 3000-p wood ... Show all

Table of Contents

Save PDF