Related Manuals for Varian HS652
Summarization of Contents
GENERAL INFORMATION
STORAGE
Environmental requirements for storing the pump, including temperature and humidity.
PREPARATION FOR INSTALLATION
Steps and considerations before installing the pump, including unpacking and weight.
MAINTENANCE
DISPOSAL
Guidelines for proper disposal of the pump and packaging materials according to regulations.
SECTION I TECHNICAL INFORMATION
TECHNICAL DESCRIPTION
Detailed description of the pump's technical aspects, design features, and operating principles.
LUBRICATION
Explanation of the pump's lubrication system, oil circulation, and relevant components.
VACUUM SEALS
Details on the pump's sealing mechanisms, gasket types, and shaft sealing.
GAS BALLAST VALVE
Explanation of the gas ballast valve function and its importance in preventing condensation.
ANTI-SUCKBACK DEVICE
Description of the anti-suckback device and its role in isolating the vacuum system when the pump stops.
SAFETY PRECAUTIONS
TRANSPORT AND INSTALLATION
Instructions for safe transport, handling, and installation of the pump.
PRELIMINARY OPERATIONS
Steps to perform before starting the pump, including oil filling and flange preparation.
SECTION II
CONNECTION TO THE ELECTRIC SUPPLY
Instructions for connecting the pump to the electrical power supply.
CONNECTIONS TO THE INLET AND EXHAUST FLANGES
Guidance on connecting the pump's inlet and exhaust flanges for system integration.
STARTING AND RUNNING THE PUMP
Procedures for starting and operating the pump correctly, including initial run-in.
SAFETY RULES
STOPPING THE PUMP
Instructions on how to properly stop the pump and considerations for extended shutdowns.
WARNING NOTES
Critical safety warnings regarding electrical hazards, maintenance, and operation to prevent injury.
MAINTENANCE ACTIONS
CAUTION NOTES
Important cautions for maintenance and operation to prevent equipment damage.
SCHEDULED MAINTENANCE
Procedures for routine maintenance to maintain optimal pump performance.
UNSCHEDULED MAINTENANCE
Procedures for restoring the pump after a malfunction or breakdown.
PUMP ELECTRONIC CONTROLLER
Technical specifications
Detailed technical specifications of the pump's electronic controller, including voltage and frequency.
RS 232/RS 485 COMMUNICATION DESCRIPTION
Explanation of serial communication interfaces (RS 232/RS 485) for the pump controller.
IP44 ACCESSORY KIT P/N 949-9367
Electronic self-test
Description of the electronic self-test performed when the pump is powered on.
Rotor lock test
Explanation of the rotor lock test performed after the electronic self-test.
Protection against solids
Explains how the pump is protected against accidental touch and intrusion of parts.
Protection against liquids
Explains the pump's protection against water spray from all directions.
Need help?
Do you have a question about the HS652 and is the answer not in the manual?
Questions and answers