Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Topeak TPG-X2
Summarization of Contents
PAKGO Series Overview
PAKGO X and PAKGO XS Models
Overview of the PAKGO X and PAKGO XS luggage models.
PAKGO Series Key Features
Name Tag and Bumpers
Integrated name tag and protective bumpers for the case.
Wheels and Lock System
Features 60mm multi-directional wheels and a built-in TSA lock.
Material and Handles
100% Makrolon® Polycarbonate shell with two carry handles.
Weight Specifications
Approximate weights for PakGo X and PakGo XS models.
PAKGO Series Bike Compatibility
PAKGO X Bike Fit Guide
Specifications for fitting bikes into the PAKGO X case.
PAKGO XS Bike Fit Guide
Specifications for fitting bikes into the PAKGO XS case.
Bike Compatibility Details
Front Fork Compatibility
Compatibility of front forks with QR skewer or 12mm thru axle.
Rear Triangle Compatibility
Compatibility with 130/135mm QR skewer or 12mm thru axles.
Important Bike Fit Notes
Key considerations before fitting a bike into the case.
Incompatible Bike Types for PAKGO Series
Incompatible Front Thru-Axles
MTB front forks with 15mm or 20mm thru-axles are incompatible.
Incompatible Seat Tube and Seatpost Designs
Frames with seat tubes over 65cm or integrated seatposts are incompatible.
Incompatible Bike Sizes and Types
Incompatibility with 27.5" and 29" bikes, and fat bikes.
Incompatible Fork Types
Bikes with single-leg forks (Lefty) are incompatible.
E-bike Compatibility Considerations
E-bikes may have compatibility issues.
Maximum Weight Capacity
Maximum weight limit for the PAKGO case.
Further Incompatible Bike Types
Bottom Bracket Shape Incompatibility
Bikes with uniquely shaped bottom brackets are incompatible.
Downtube and Internal Transmission Issues
Bikes with wide downtubes or internal transmissions may not fit.
Rear Derailleur Interference
Long cage rear derailleur may interfere with case closure.
PAKGO Series Box Contents
Included Mini-Workstand
Includes a mini stand for bike assembly.
Included Bike Fit Adapters
Adapters for front fork and rear hub.
Included Protection Cradles and Spacers
Protective cradle for bottom bracket and headset spacer.
PAKGO Series Included Accessories
Frame and Fork Protection Pads
Pads for protecting the front fork and frame.
Drivetrain and Seatpost Protection
Drivetrain cover and seatpost sleeve.
Straps, Frame Pads, and Wheel Bags
Reusable ties, frame pads, and wheel bags.
Disassembling Your Bike for PAKGO Series Case
Step 1: Unlock Travel Sentry® Approved Lock
Instructions for unlocking the integrated TSA-approved lock.
Step 2: Open Case and Remove Items
How to open the case and remove contents safely.
Preparing the PAKGO Series Bike Case
Step 3: Extend Mini-Workstand Support Legs
Extending the support legs of the mini-workstand.
Step 4: Install Bottom Bracket Cradle
Attaching the rubber cradle to the mini-workstand.
Bike Component Removal for Packing
Step 5: Remove Pedals
Procedure for removing the bike pedals.
Step 6: Remove Front Wheel
Procedure for removing the front wheel.
Mounting Bike on Mini-Workstand
Disc Brake Interference Warning
Advice on handling disc brake interference with the workstand.
Step 7: Install Bike on Mini-Workstand
Detailed steps for mounting the bike onto the mini-workstand.
Rear Wheel and Bottom Bracket Adjustment
Step 8: Remove Rear Wheel
Procedure for removing the rear wheel.
Adjust Bottom Bracket Fit
Adjusting the position to fit the bottom bracket.
Adapter Installation Guide
Step 9: Install Adapter B
Instructions for installing Adapter B.
Handlebar and Headset Assembly
Step 10: Remove Handlebar/Stem
Removing the handlebar and stem.
Step 11: Place Handlebar and Install Headset Spacer
Placing the handlebar and installing the headset spacer.
Handlebar Mounting Options
Internal Cable Routing Considerations
Mounting considerations for bikes with internal cable routing.
Protective Pad Installation
Step 12: Install Front Fork Pad Set
Installing fork pads to secure and protect the handlebar.
Step 13: Install Chainstay Pad
Attaching the chainstay protective pad.
Drivetrain Protection Installation
Step 14: Install Drivetrain Cover
Installing the drivetrain cover.
PAKGO Xs Specific Bike Packing Steps
Step 14: Remove Rear Derailleur First
Removing the rear derailleur before other steps.
Step 14: Install Rear Derailleur Pad
Installing the rear derailleur protective pad.
Step 14: Install Drivetrain Cover (Xs)
Installing the drivetrain cover for the XS model.
Frame Protection and Seatpost Fitting
Step 15: Cut Frame Pad to Fit Seatstay
Cutting and fitting frame pads to the seatstay.
Step 16: Remove Seatpost / Saddle
Removing the seatpost and saddle.
Seatpost and Saddle Installation
Step 17: Install Seatpost Plugs
Installing seatpost plugs for round or aero seatposts.
Step 18: Install Seatpost/Saddle Assembly
Installing seatpost and saddle with sleeve onto the frame.
Securing the Bike on the Workstand
Step 19: Fix Bike on Mini-Workstand
Securing the bike onto the mini-workstand.
Step 20: Cut Frame Pads to Fit Tubes
Customizing frame pads to fit specific tubes.
Packing Wheels and Finalizing Case
Step 21: Place Wheel Bags into Case
Placing wheel bags into the case.
Step 22: Tighten Straps
Tightening straps to secure the contents.
Mini-Workstand Folding and Case Integration
Step 23: Fold Support Legs
Folding the support legs of the mini-workstand.
Step 24: Install Bike Frame into Hinge Slot
Integrating the bike frame and workstand into the case hinge.
Final Bike Adjustments and Securing
Step 25: Rotate Bike to 90°
Rotating the bike to the 90° position.
Step 26: Fix Bike with Strap
Securing the bike with straps.
Securing Bike and Closing the Case
Step 27: Tighten Straps to Secure Bike
Tighting straps to firmly secure the bike inside the case.
Step 28: Close and Lock Case
Closing and locking the case.
How to Use the TSA Lock
Unlock Button and Dials Operation
How to use the lock's unlock button and dials.
Set Custom Combination for Lock
Steps to set a custom combination for the lock.
Important Warnings and TSA Lock Information
Lock Operation Warnings
Warning about lock cylinder operation and combination.
What is a Travel Sentry® Approved Lock?
Explanation of the TSA-approved lock system.
How to Re-assemble Your Bike
Step 1: Open the Case
Opening the case to take out the bike.
Step 2: Release Straps
Releasing the straps holding the bike.
Mini-Workstand and Adapter Release Procedures
Step 3: Rotate Bike to 90°
Rotating the bike to the 90° position.
Step 4: Remove Mini-Workstand
Removing the mini-workstand.
Final Bike Assembly Steps
Step 5: Extend Support Legs
Extending the support legs for final bike assembly.
Step 6: Unpack All Protected Items
Removing protective items from the bike.
Handlebar and Headset Assembly
Step 7: Remove Headset Spacer and Install Handlebar
Removing headset spacer and installing handlebar.
Workstand Strap and Adapter Release
Step 9: Release Strap on Mini-Workstand
Releasing the strap from the mini-workstand.
Step 10: Remove Adapter B
Removing Adapter B.
Rear Wheel and Adapter Removal
Step 11: Install Rear Wheel
Installing the rear wheel.
Step 12: Remove Adapter A
Removing Adapter A.
Final Bike Assembly and Ride Preparation
Step 13: Install Front Wheel
Installing the front wheel.
Step 14: Install Pedals, Seatpost, and Accessories
Reinstalling pedals, seatpost, and accessories. Ready to ride.
Product Warranty Information
Warranty Claim Requirements
Procedures and requirements for making a warranty claim.
Warranty Details and Contact Information
Warranty Coverage and Limitations
Details on what the warranty covers and its limitations.
Need help?
Do you have a question about the TPG-X2 and is the answer not in the manual?
Questions and answers