Topeak PanoComputer Wireless User Manual

OPERATION SYMBOLS Press
MODE Button RESET Button SET Button
( 3 sec to clear
and reset all data)
1 sec: select digit
3 sec: go to next section /
REQUIRED ACCESSORIES
into setting mode
6 sec: switch COMPUTER
PanoBike Heart
MODE and REMOTE
Rate Monitor
MONITOR MODE.
Art No. TPB-HRM01
HOW TO SET UP YOUR PANOCOMPUTER
[ ]
| OPERATE THE COMPUTER
OPTION A COMPUTER MODE
BIKE A.B
Follow the procedure in each section to set up your computer:
to enter each setting mode.
PAIRING
SPEED &
CADENCE
SENSOR
+
3 sec
HEART
RATE
MONITOR
SCREEN DISPLAY (RIDING STATUS) (COMPUTER MODE ONLY)
Screen 1 Screen 2
[
OPTION B REMOTE MONITOR MODE
Please download and install Topeak PanoBike App from Apple App Store or GooglePlay to your smart device first.
1
Open PanoBike App in your smart device then
tap " " icon.
Turn-on Bluetooth® on your smart device first.
HOW TO OPERATE IN SECOND MONITOR MODE (SECOND MONITOR function)
1
On computer for 6 sec to enter REMOTE MONITOR MODE.
6 sec
PanoComputer
Press and Hold
[
COMPUTER MODE
Bolt
PanoComputer Mount
(Fits ø 31.8 mm Handlebar only)
Sensors transmit ride data
to computer directly.
PanoBike Speed & After riding, data can be
Cadence Sensor
transferred to PanoBike
App on your smart device.
Art No. TPB-CS01
Date 12/ 24h clock
to change digit.
3 sec
Turn the crankarm counterclockwise. When "1" appears,
the Speed & Cadence Sensor pairing is successful.
Note: Bike B will indicate "2".
If no button is touched for 10 seconds,
the screen will switch to Screen 1
automatically.
Screen 3
]
| SETTING THE COMPUTER WITH PANOBIKE APP (Using English version as an example)
2
On computer for 6 sec to enter
REMOTE MONITOR MODE.
6 sec
2
Open Topeak PanoBike App. Tap "START RIDE", then tap "START" to record your ride.
Wireless
• PanoComputer data syncs with Topeak PanoBike App only.
• Please read all instructions before first use!
• Before riding, close the PanoBike App on your smart device to record ride data in Computer Mode.
PanoComputer includes "DUAL MODE" function
]
km/ m Wheel Circumference
to next selection. Keep following the &
SAVING RIDING DATA
3
Tap "Setup" button to pair smart device with computer.
Choose desired time and unit format. Insert power zones and
wheel size setting. Tap "Save" to complete.
Follow the pairing procedures to pair Speed & Cadence Sensor and Heart Rate Monitor as in OPTION A.
(Using English version as an example)
Start riding...
Data syncs with computer
Ride data is transmitted to
computer from smart device.
Smart device screen can be
turned o to save battery.
for
6 sec to switch.
ODO
processes for the rest of setting then to confirm .
3 sec
Wear the Heart Rate Monitor on your chest.
When "1" appears, the pairing is successful.
Note: Bike B will indicate "2".
(COMPUTER MODE ONLY)
3 sec
to check the ride
data just saved.
to save
ride data
II
Tap to stop and save ride
data to your smart device.
User's Guide
GB
[ ]
REMOTE MONITOR MODE
Sensors transmit ride data to
PanoBike App on your smart
device and displays ride data on
computer. Smart device screen
is turned off to save battery.
Pairing Speed & Cadence
Sensor + Heart Rate Monitor
Confirm
4
for 6 sec
to return to COMPUTER
MODE.
3
for 6 sec
to return to COMPUTER
MODE after riding.