Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Salicru SLC-30-CUBE4
Summarization of Contents
2. SAFETY INFORMATION
2.1. USING THIS MANUAL
Provides guidance on how to use the manual effectively.
2.1.1. Conventions and symbols
Explains the conventions and symbols used in the manual.
2.1.2. Safety considerations
Outlines crucial safety precautions and considerations for operating the unit.
4. PRESENTATION
4.1. VIEWS OF THE CABINETS
Describes the physical views and components of the UPS cabinets.
4.1.1. UPS cabinets
Details the UPS cabinets and their sizes for different power ratings.
4.2. PRODUCT DEFINITION
Explains the product nomenclature and model definition.
4.2.1. UPS and battery module nomenclature
Explains the nomenclature for UPS and battery modules.
4.3. UPS CHARACTERISTICS LABEL
Details the information found on the UPS characteristics label.
4.4. UPS DESCRIPTION
Provides a general description and block diagram of the UPS unit.
4.4.1. General description and block diagram
Provides a general description and block diagram of the UPS unit.
4.4.2. Rectifier-booster
Details the function and architecture of the rectifier-booster module.
4.4.3. Inverter
Explains the function and architecture of the inverter module.
4.4.4. Batteries and battery charger
Describes the role of batteries and the battery charger in the UPS system.
4.4.5. Static bypass
Explains the function and operation of the static bypass switch.
4.4.6. Manual or maintenance bypass
Details the manual or maintenance bypass functionality.
4.5. OPERATING MODES
Explains the different operating modes of the UPS.
4.5.1. Normal mode
Describes the UPS operation in normal mode, providing maximum protection.
4.5.2. Battery mode
Explains how the UPS operates when the AC input fails, using battery power.
4.5.3. Bypass mode
Describes the bypass mode where loads are supplied directly from the bypass line.
4.5.4. Maintenance bypass mode
Explains the maintenance bypass mode for servicing without interrupting power.
4.5.5. ECO mode
Describes the ECO mode for increased system efficiency with reduced protection.
4.5.6. Frequency converter mode
Details the frequency converter mode for fixed output frequency.
4.6. OPERATION AND CONTROL DEVICES
Covers the devices used for operating and controlling the UPS.
4.6.1. Switches
Explains the function of various switches on the UPS unit.
4.6.2. Control panel with touchscreen
Details the integrated touchscreen control panel and its features.
4.6.3. External interface and communications
Describes the external interface and communication ports of the UPS.
5. INSTALLATION
5.1. RECEPTION
Instructions for receiving and checking the UPS unit and its components.
5.1.1. Reception, unpacking and contents
Details the process of receiving, unpacking, and verifying the UPS contents.
5.1.2. Storage
Guidelines for storing the UPS unit and its components.
5.1.3. Unpacking
Step-by-step instructions for unpacking the UPS equipment.
5.1.3.1. 30-40 kVA equipments
Specific unpacking instructions for 30-40 kVA UPS equipment.
5.1.3.2. 50-80 kVA equipments
Specific unpacking instructions for 50-80 kVA UPS equipment.
5.1.5. Siting, immobilisation and considerations
Covers site selection, securing, and general considerations for UPS installation.
5.1.5.1. Siting for single units
Guidelines for siting single UPS units and ensuring ventilation.
5.1.5.2. Siting for parallel systems
Guidelines for siting parallel UPS systems and ensuring ventilation.
5.1.5.3. Immobilisation and levelling of the unit
Instructions for immobilising and levelling the UPS unit.
5.1.5.4. Preliminary considerations before connection
Important considerations before making electrical connections to the UPS.
5.1.5.5. Preliminary considerations before connection, regarding the batteries and their protection devices
Considerations for connecting batteries and their protection devices.
5.2. CONNECTIONS
Explains how to connect the UPS unit to power and other systems.
5.2.1. 30-40 kVA equipments
Specific connection procedures for 30-40 kVA UPS equipment.
5.2.2. 50-80 kVA equipments
Specific connection procedures for 50-80 kVA UPS equipment.
5.2.3. Connection to the mains, input terminals
Instructions for connecting the mains power to the input terminals.
5.2.4. Connection of the separate static bypass line
How to connect the separate static bypass line for specific versions.
5.2.5. Connection of the output, output terminals
Instructions for connecting the output terminals to the loads.
5.2.6. Connection of the unit's battery terminals
How to connect the battery terminals to the battery module.
5.2.7. Connection of the parallel bus
Explains how to connect units in a parallel system.
5.2.8. Interface and communications
Details the interface and communication ports available on the unit.
5.2.8.2. Installation of SNMP cards
Instructions for installing SNMP cards for network management.
6. OPERATION
6.1. UPS START-UP
Procedures for starting up the UPS unit.
6.1.1. Checks before start-up
Essential checks to perform before initiating the UPS start-up sequence.
6.1.2. Initial start-up
Specific steps for the first-time start-up of the UPS.
6.1.3. Generic start-up procedure (normal mode)
Standard procedure for starting the UPS in normal operating mode.
6.1.4. Procedure for transferring to bypass mode
Steps to manually transfer the UPS output to bypass mode.
6.2. PROCEDURE FOR STOPPING THE UPS
Correct procedure for completely shutting down the UPS.
6.3. MANUAL OR MAINTENANCE BYPASS
Procedures for using the manual or maintenance bypass functionality.
6.3.1. Transferring to maintenance bypass mode
Steps to transfer the UPS to maintenance bypass mode for service.
6.3.2. Transferring back to normal mode (from maintenance bypass mode)
How to return the UPS from maintenance bypass to normal operation.
6.4. EMERGENCY STOP (EPO)
Information and procedures related to the Emergency Stop function.
6.4.1. Activation of the emergency stop (EPO)
Procedures for activating the Emergency Stop function.
6.4.2. System restoration after an emergency stop (EPO)
Steps to restore the UPS to normal operation after an emergency stop.
7. CONTROL PANEL
7.1. MAIN OR HOME SCREEN
Description of the main screen and its navigation.
7.2. MEASUREMENTS MENU
Accessing and viewing measurement data on the control panel.
7.3. ALARMS MENU
How to view and manage alarms displayed on the control panel.
7.4. STATUS AND CONTROL
Overview of the status and control options available on the panel.
7.5. NOMINAL VALUES MENU
Displays the configured nominal electrical parameters of the UPS.
7.6. GRAPHICS MENU
Accessing graphical representations of UPS measurements.
7.7. ADVANCED MENU
Access to advanced functions for qualified personnel.
7.8. SETTINGS BUTTON
Access to system configuration and settings.
7.10. INFORMATION BUTTON
Displays internal system information relevant to technical staff.
7.11. ALARM MESSAGES
Details of possible alarm messages and their severity.
8. MAINTENANCE, WARRANTY AND SERVICE
8.1. BATTERY MAINTENANCE
Guidelines for maintaining and caring for the UPS batteries.
8.1.1. Notes for installing and replacing the batteries
Important notes for safely installing and replacing UPS batteries.
8.2. WARRANTY CONDITIONS
Information regarding the product's warranty terms and conditions.
8.3. TECHNICAL SERVICES NETWORK
Information on accessing the technical service network.
9. ANNEX I. TECHNICAL SPECIFICATIONS
9.1. INTERNATIONAL STANDARDS
Lists the international standards the UPS complies with.
9.2. ENVIRONMENTAL CHARACTERISTICS
Details environmental operating conditions and specifications.
9.3. MECHANICAL CHARACTERISTICS
Describes the physical dimensions and weight of the UPS.
9.4. ELECTRICAL CHARACTERISTICS
Comprehensive electrical specifications for the UPS components.
9.4.1. Electrical characteristics (rectifier input)
Details electrical specifications for the rectifier input.
9.4.2. Electrical characteristics (bypass input)
Details electrical specifications for the bypass input.
9.4.3. Electrical characteristics (battery charger)
Details electrical specifications for the battery charger.
9.4.4. Electrical characteristics (inverter output)
Details electrical specifications for the inverter output.
9.4.5. Electrical Characteristics (External protection elements)
Details electrical specifications for external protection elements.
9.4.6. Communications
Details the communication interfaces and specifications of the UPS.
9.4.7. Efficiency
Provides efficiency characteristics of the UPS under various conditions.
10. ANNEX II. CONNECTIVITY
10.1. REGISTRATION OF THE UNIT IN THE CLOUD
Steps to register the UPS unit in the cloud for remote monitoring.
10.1.1. Nimbus portal
Instructions for registering the unit via the Nimbus online portal.
10.1.2. Reading the QR code
Instructions for registering the unit by reading a QR code.
10.2. GENERAL TECHNICAL SPECIFICATIONS
Technical characteristics of the NIMBUS communication card.
Need help?
Do you have a question about the SLC-30-CUBE4 and is the answer not in the manual?
Questions and answers