Operation; Main Unit Operation - Sharp FP-R65CX Operation Manual

OPERATION

MAIN UNIT OPERATION

AUTO Operation Indicator Light
Power ON/OFF Button
1
• Used to start operation (short beep) and stop operation (long beep)
• Plasmacluster Indicator Light and Fan Speed Indicator Light turn on/off.
• Unless unplug the power cord, the operation starts in the previous mode the unit
was operated in.
MODE Selection Button
2
• The operation mode can be switched.
AUTO operation
The fan speed is automatically switched
(HIGH*, MEDIUM, SILENT) depending on
the amount of impurities in the air. The
sensors detect the impurities for efficient
air purification.
POLLEN mode operation
The unit will operate at HIGH* fan speed
for 10 minutes, then will alternate be-
tween MEDIUM and HIGH* for 20 min-
utes.
10 minutes: HIGH fan speed
20 minutes: MEDIUM fan speed
20 minutes: HIGH fan speed
* HIGH fan speed is an intermediate speed
between MEDIUM and MAX.
Pollen Mode Indicator Light
E-12
Main Unit Controls
• AUTO
• POLLEN
• SILENT
• MEDIUM
• MAX
Mode Selection Button
Power ON/OFF Button
Fan Speed Indicator Light
MAX operation
The unit will operate at a fan
speed of MAX.
MEDIUM operation
The unit will operate at a fan
speed of MEDIUM.
SILENT operation
The unit will operate quietly
using minimal air intake.