Detection Zone; Operation - STEINEL DUAL HF KNX Manual

Accessories
Clamping-type ceiling adapter RC6 KNX service remote
EAN no.: 4007841 000370 control
Surface-mounting adapter EAN no.: 4007841 593018
AP Box KNX User remote control
EAN no.: 4007841 003029 RC7 KNX
Guard cage EAN no.: 4007841 592912
EAN no.: 4007841003036
How it Works / Basic Function
The infrared and HF presence Using modern, high-frequency
detectors from the Control technology, the HF 360 guar-
PRO range control lighting as antees detection of movement
well as HVAC, e.g. in offices, absolutely anywhere irrespec-
schools, public buildings or at tive of radiated temperature.
home, in relation to ambient Sensing movement in two di-
light level and the presence of rections, the DUAL HF-sensor
persons. is ideal for corridors in hotels,
schools and office buildings.
The IR Quattro with highly ad-
vanced lens provides a square Presence Control has a low in-
detection zone, as the typical trinsic power consumption.
shape of a room, in which the
smallest of movements are
sensed.

Operation

Note: To calibrate the pres- 2. Load the Physical Address
ence detector, please go to and Calibration Program
www.steinel.knx.de into the presence detector.
When you are prompted to
1. Issue Physical address press the programming
and generate calibration button (8).
programme in the ETS.
í Presence detection
í Controlling lighting with
brightness control
í HVAC control
The function to be used (acti-
vated) is defined by the "Gen-
eral Settings" parameter win-
dow using the ETS3.f version
of the Engineering Tool Soft-
ware (ETS) and higher.
3. The blue LED goes out
once programming has
been successfully com-
pleted.
- 14 -

Detection Zone

IR Quattro KNX / IR Quattro HD KNX
presence
radially
tangentially
Reliable presence detection largely depends on
the number, condition and arrangement of the
lens segments. The IR Quattro KNX with its
square detection zone of 16 m 2 divided up into
13 levels and 1760 switching zones senses the
smallest of movements. With a square detec-
tion zone covering an area of 64 m 2 , the IR
Quattro HD KNX has 4800 switching zones that
Reach Setting
(PC IR Quattro / IR Quattro HD KNX)
Potentiometer
Adjusts reach to specific specifications for selecting
requirements. See table on settings to suit specific require-
pages 4/5 showing technical ments.
tangentially
radially
presence
provide even greater precision. These reaches
can be adjusted to suit specific requirements at
the setting potentiometer. The square detection
zone and the capability of interconnecting mas-
ter/slave versions provide the basis for creating
optimum configurations quickly and easily.
- 15 -