Detection Zone - STEINEL LiveLink HF 360 Manual

How it works / basic function
The infrared and high-frequency Sensing movement in two
presence detectors from the directions, the DUAL HF Live-
Control PRO range control Link sensor is ideal for corridors
lighting, e.g. in offices, WCs, in hotels, schools and office
public buildings or at home, in buildings. The IR Quattro HD
relation to ambient light level LiveLink with highly advanced
and the presence of persons. lens provides a square detec-
tion zone, as the typical shape
Modern, high-frequency tech- of a room, in which the smallest
nology guarantees that move- of movements are sensed.
ment is detected absolutely
anywhere irrespective of
radiated temperature.
− Reach setting
Setting capabilities via
LiveLink app: − Twilight setting
− Time setting
− Semi- / fully automatic mode
− Constant-lighting control
− Interconnecting several
sensors

Detection zone

IR Quattro HD LiveLink
presence
radial
tangential
Reliable presence detection depends largely on
the number, quality and arrangement of the lens
elements. The IR Quattro HD LiveLink and the
square detection zone covering an area of 64 m
has 4800 switching zones that provide even
greater precision.
Settings are made via app
using the LiveLink Box.
The setting mechanism on the
sensor is used for setting the
IR Quattro HD LiveLink reach.
The sensor is connected to
the LiveLink box as a control
unit via a DALI bus. The sensor
uses the DALI line for commu-
nicating with the LiveLink box
and for power. The LiveLink
sensors only work in the
LiveLink system.
− Teach mode
− Test mode
− Daytime operation
− IQ mode
− Basic brightness
tangential
radial
presence
These reaches can be adjusted to suit specific
requirements via the mechanical reach setting
capability. The square detection zone provides
the basis for creating optimum configurations
2
quickly and easily.
- 14 -
Reach setting, IR Quattro HD LiveLink
Potentiometer d
Adjustment of the reach to See table on page 4.
individual requirements.
Reach setting, DUAL HF LiveLink / HF 360 LiveLink
DUAL HF LiveLink - mounting height 2.8 m
The DUAL HF LiveLink sensor has 2 special HF
sensors that detect movement from the ceiling
in both corridor directions. An app can be used
to set the reach electronically in either direction
at the same time.
HF 360 mounting height 2.8 m
The reach of the HF 360 is electronically
adjustable. 1 or 2 detection directions can be
masked out for adjustment to the room situation.
An angle of coverage of 360° provides a max.
reach of 8 m.
- 15 -